The country of origin of a fiber optic patch cord assembly
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated March 4, 2026, you requested a country of origin ruling on a fiber optic patch cord assembly. The merchandise under consideration is described as a fiber optic patch cord assembly, part number CX1A0002R0D05. The subject assembly is further described as a fiber optic cable consisting of a fiber optic core made of 2 fibers. The fiber core is enclosed within a jacket and the cable assembly is terminated at each end with a fiber optic connector.
The subject cable is used within various telecommunications industries to transfer optical data signals. In your request, you state the manufacturing process begins with the creation of the optical fibers in the United States. This process begins with the melting and stretching of the glass raw material into a glass bar. This bar is then ground and cleaned before it is further stretched and drawn into the appropriate length and diameter for the individual optic fiber.
This fiber is then coated with protective polymer, trimmed at the ends, and tested for strength and function before it is exported to China. In China, the fiber core is colored, tested, and jacketed with aramid yarn or other plastic. The cable is then cut to length, and the ends are then prepared for the addition of the connectors.
The connectors, originating in China, are then assembled onto the ends in China or Vietnam, and the finished cable is inspected, tested and packaged for shipments to the U.S. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Regarding the origin of the subject fiber optic cable, it is the opinion of this office that the fiber cores manufactured in the United States impart the character of the finished cables. Further, the assembly process performed in China or Vietnam, including the addition of the covering and connectors, does not substantially transform the cores into new and different articles of commerce as their end use is predetermined and they perform the primary function of transmitting the data signals.
Based upon the facts presented, the origin of the patch cord assembly, part number CX1A0002R0D05, will be the United States. Whether an article may be marked with the phrase "Made in the USA" or similar words denoting U.S. origin, is an issue under the authority of the Federal Trade Commission (FTC). We suggest that you contact the FTC Division of Enforcement, 6th and Pennsylvania Avenue, N.W., Washington, D.C. 20508 on the propriety of proposed markings indicating that an article is made in the USA.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359461).