The country of origin of an expansion tank
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Taking into account the fact that the final assembly occurs in Thailand, and the cost of Thai components and labor is over 75 percent of the total cost, it is the opinion of this office that the country of origin for the expansion tank or expansion reservoir (Part Number JX-A189-2) will be Thailand.
Ruling text
In your letter dated March 7, 2026, you requested a country of origin ruling on an expansion tank. The article under consideration has been identified as an expansion tank or expansion reservoir (Part Number JX-A189-2), which is a core supporting component in the cooling systems of vehicles, agricultural machinery, and other equipment. It is manufactured from reinforced polypropylene (PP) and poly-amide, which offer resistance to high/low temperatures and corrosion.
The expansion tank is produced via precision injection molding and welding processes. It typically features a flat rectangular prism shape or a customized structure designed to fit specific installation spaces. The tank body incorporates both longitudinal and transverse reinforcing ribs as well as metal inserts to ensure pressure and burst resistance (capable of withstanding pressures over 600 kPa). It employs a semi-transparent design with clearly marked MAX and MIN liquid level indicator lines.
The top is equipped with a sealed cap that includes a pressure relief valve. The sides feature a filling port, inlet/outlet ports, and mounting holes for sensors. It comes with mounting brackets and hose clamp structures, supporting installation via screw fixing or welding. When the equipment heats up, the coolant expands, and the excess fluid flows into the expansion tank for storage. When the equipment cools down, the system pressure drops, and the stored coolant is drawn back into the main tank.
This prevents the system from overheating due to coolant shortage and reduces the frequency of antifreeze top-ups. Within the sealed cooling system, the tank absorbs and balances pressure fluctuations in the circuit. The pressure relief valve on the tank cap automatically opens to release air when pressure becomes excessive, preventing pipes from bursting. Simultaneously, it helps maintain proper positive pressure within the system, which aids in purging air and raises the boiling point of the coolant.
The tank separates air bubbles formed during coolant circulation, preventing "airlocks" that hinder cooling efficiency and reducing the impact caused by bubble collapse. This lowers the risk of cavitation inside the engine water jacket, thereby protecting core components. The semi-transparent tank body and clear level markings allow users to visually check the coolant volume. Some models support the installation of a level sensor.
When the liquid level falls below the minimum mark, an alarm can be triggered to remind the user to add coolant promptly, preventing potential equipment damage due to fluid shortage. According to the bill of materials (BOM) and production flowchart submitted with your request, the body of the tank (upper and lower) is made by mold injection in Thailand. The float bowl and floating component are also made in Thailand.
The pressure cap, copper pipes and main pipe, sensor, gasket, and clasp are made in China and imported to Thailand for final assembly with the Thai tank body, float bowl, and floating component. When determining the country of origin, the substantial transformation analysis is applicable.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359542).