The country of origin of a prismatic battery cell
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated March 9, 2026, you requested a country of origin ruling on behalf of your client, Sunwoda Automotive Energy Technology (Thailand) Co., Ltd. The merchandise under consideration is identified as a prismatic lithium polymer battery cell, model number SBP-01-3140. The cell has a nominal voltage of 3.2 VDC, a nominal capacity of 314 Ah, and a nominal energy of 1,005 Wh. It measures approximately 174.3 millimeters in width, 71.5 millimeters in thickness, and 204.3 millimeters in height.
The subject battery cell will be manufactured in Thailand using two scenarios. All materials and components are sourced from China, except for the battery cell cover, the battery cell case, and the negative and positive connectors, which may be sourced from China or domestically in Thailand. The process begins with milling and mixing active materials, conductive agents, solvents, and binders into slurries for the anode and cathode electrodes.
A sodium carboxymethyl cellulose binder is dissolved in a solvent, which is then mixed with a graphite material to create the anode electrode slurry. The cathode electrode slurry is produced by combining and mixing lithium iron phosphate, polyvinylidene fluoride, N-methyl-2-pyrrolidone, and carbon black. Depending on the electrode, the slurries are coated onto either an aluminum foil (for the cathode) or a copper foil (for the anode).
The coated foils are dried in an oven and then fed into a calendaring machine, which uses rollers to press the coated foil to the required thickness. This process also increases the density and binding strength between the active material and foil. Afterwards, the rolls are slit into strips. In the first scenario, both the anode and cathode material rolls are made in China. In the second scenario, the anode material roll is made in Thailand, and the cathode material roll is made in China.
In Thailand, the rolls of electrode material and separators are laser cut to shape and then combined using a winding process. During the winding process, the electrode sheets and separators are layered and wound into a jelly roll, which is then pressed into a rectangular structure. Afterwards, tabs are welded to the jelly roll, which is then wrapped with mylar and placed inside an aluminum case. The battery cell is sealed by welding the top cap to the aluminum case.
Finally, the cell undergoes an activation process, which involves pre-charging, injecting electrolyte using high-temperature infiltration, and charging. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359554).