The country of origin of a steel corrugated connector
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated March 10, 2026, you requested a country of origin ruling on a steel corrugated connector. Descriptions, technical information, and photographs were submitted with your request. The item under consideration is described as a stainless steel corrugated connector to connect a gas supply to other utilities that use gas for their operations such as water heaters, ranges for cooking, and dryers. You state the length will range between 12 inches and 72 inches.
The corrugated tube is made from stainless steel strip, and the two ends will feature metal fittings, specified as 3/4 – 14 National Pipe Taper (NPT). In your submission, you provided a description of the production process and a diagram for the corrugated connector. The raw materials to produce the tube and the fittings are both from Thailand.
The production process for the tube in Thailand includes shaping and welding a stainless steel strip into a tube, putting it through a corrugating process, cutting it to a specified length, and flattening both ends. The fittings are also produced in Thailand through forging the raw materials, metal blanks, into their approximate shape and size. At this point, the tube and fittings are shipped to China where the fittings undergo machining processes which result in the finished end fittings.
The fittings are then assembled onto the ends of the tube creating the final product which is packed in cartons and shipped to the United States. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
The manufacturing processes and materials used to produce the corrugated connector are similar to those described in New York Ruling N355143, dated October 22, 2025. The tube is fully formed, corrugated, and cut-to-length in Thailand. Before it is shipped to China, the tube has a predetermined function as a connector to a gas supply and other gas-powered utilities.
The fittings are forged in Thailand, although they are not fully functional, they are formed to the approximate shape and size of the finished end fittings. After forging, the fittings are shipped to China where they undergo a machining process to prepare their surfaces for use. The machining of the fittings in China do not constitute a substantial transformation because they retain the name, character, and use acquired from forging in Thailand.
In totality, no new article emerges when the final product is assembled in China from that possessed prior.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359614).