The country of origin of wiring harnesses
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated March 13, 2026, you requested a country of origin ruling on wiring harnesses. There are two items at issue with this request, which are described as electrical wire harness assemblies. The first assembly, identified by part number 137634100, is a wiring harness comprised of a bundle of individually insulated wire conductors terminated at each end with specific connectors.
This assembly is used to deliver electrical power from the main power source to different ventilation components such as fans, motors, and control units. The second assembly, identified by part number ASY30725, is a wiring harness comprised of a bundle of individually insulated wire conductors terminated at one end with a specific connector and individual terminal lugs at the other end.
This assembly is used to deliver electrical power and control signals between ignition system components in a vehicle, ensuring proper electrical flow from the battery to ignition switch components such as the ignition coil, control module, and various sensors. The manufacturing process for part number 137634100 is described as follows. Insulated electrical conducting copper wires are imported from the United States to Malaysia.
Various terminals, resistors, heat-shrink tubing, and connectors of Chinese or US origin are imported into Malaysia, while soldering wire and tape are sourced in Malaysia. In Malaysia, the copper conductor wires are cut to desired length and the ends are stripped in preparation for the addition of the terminals and connectors. The terminals and connectors are then assembled onto the ends, the resistors are soldered into place, and the conductors are bundled together into the appropriate configuration.
The assembly harnesses are then tested, inspected, and packaged for export to the United States. The manufacturing process for part number ASY30725 is described as follows. Insulated electrical conducting copper wires are imported from China and the United States, depending on the specific wire, to Malaysia. Various terminals, heat-shrink tubing, and connectors of Chinese origin are imported into Malaysia, while other terminals, heat-shrink tubing, and connectors are sourced in Malaysia.
In Malaysia, the copper conductor wires are cut to desired length and the ends are stripped in preparation for the addition of the terminals and connectors. The terminals and connectors are then assembled onto the ends and the conductors are bundled together into the appropriate configuration. The assembly harnesses are then tested, inspected, and packaged for export to the United States. When determining the country of origin, the substantial transformation analysis is applicable.
See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359714).