The tariff classification of dumpers from Spain
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for both models, D601AHG and D350AHG, will be 8704.10.5060, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Motor vehicles for the transport of goods: Dumpers designed for off-highway use: Other: Other”.
Ruling text
In your letter dated March 18, 2026, you requested a tariff classification ruling on behalf of your client, JLG Industries, Inc., located in McConnellsburg, PA. The request concerns two models of motorized dumpers designed for off-highway applications such as construction, mining, and grounds maintenance. They are low-speed vehicles intended for hauling debris, rocks, dirt, and similar materials short distances at low speeds in rough terrain.
The first item under consideration has been identified as an AUSA articulated dumper, model # D601AHG, manufactured by JLG. You state that the dumper body is made of ASTM 572 Grade 50 and AISI 4140 steel in thicknesses ranging from 3 – 12 mm. The dumper body is designed to offer protection to the cab/driver, in that the highest wall of the dumper body faces the driver. This model also has an additional panel extension for further protection.
The dumper body is designed so that the floor slopes upward toward the rear. Model D601AHG may be ordered with, or without, a cab. You claim that when a cab is installed, it is half the width of the dumper body. Model D601AHG possesses the following features: Axles bolted directly to the frame No suspension components Hydrostatic brakes Heavy-duty hydraulic service brake Parking brake designed to ensure reliable holding on slopes Maximum speed 15.5 mph.
Earth-moving construction tires Tare weight/payload ranges from 1.4 to 1:1.26 (depending on whether the product has a cab or an unenclosed driver's seat) (4,360-4,755 kgs.) Maximum payload 6,000 kgs. (13,227 lbs.) The second item under consideration has been identified as an AUSA articulated dumper, model # D350AHG, manufactured by JLG. You state that the dumper body is made of ASTM A36 and AISI 4140 steel in thicknesses ranging from 3 – 30 mm.
The dumper body is designed to offer protection to the driver, in that the highest wall of the dumper body faces the driver. The dumper body is designed so that the floor slopes upward toward the rear. Model D350AHG possesses the following features: Axles are bolted directly to the frame No suspension components Hydrostatic brakes Heavy-duty hydraulic service brake Parking brake designed to ensure reliable holding on slopes Maximum speed 12.4 mph.
Earth-moving construction tires Tare weight/payload ratio of the product is 1:1.21 (2,875 kgs) Maximum payload 3,500 kgs.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359859).