The country of origin of heads-up display modules
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, the country of origin of the display module, model DE026DC-02A, will be Taiwan for marking purposes and for the purpose of applying current trade remedies and additional duties.
Ruling text
In your letter dated March 19, 2026, you requested a country of origin ruling, on behalf of your client, CarUX Technology Pte. Ltd., for a heads-up display module. The item concerned is a display module, model DE026DC-02A. This device is an automotive heads-up display (HUD) module designed to project critical driving information, such as speed and navigation, onto a windshield.
The module incorporates a 2.6-inch thin film transistor liquid crystal display (TFT-LCD) specifically engineered for heads-up image projection in vehicles. The major components consist of a glass substrate, liquid crystal material, color filter, thin film transistor (TFT), polarizer, Integrated Circuit (IC) drivers, stainless steel material, and a flexible printed circuit board assembly (FPCBA).
The manufacture of the subject display consists of a front-end process performed in Taiwan and a back-end process conducted in China. The front end manufacturing process for the TFT-LCD cell substrate has three separate steps, all of which occur in Taiwan, they include: Production of the thin film transistor (TFT) array includes the following steps: 1. TFT glass substrate is cleaned and all impurities removed. 2. Plasma-enhanced chemical vapor (PE-CVD) deposition. 3.
The addition of Silicon Nitride (SiNx) & Silicon Oxide (SiOx). 4. The addition of Amorphous Silicon (a-Si). 5. Excimer laser anneal. 6. Channel doping. 7. Gate electrode formation. 8. 8. N-type and P-type ion doping. 9. Source and Drain Electrode formation. 10. Planarization layer. 11. PVD is used to deposit transparent electrode layer. Production of the color filter (CF) substrate: 1. Black matrix is applied to CF glass substrate to define pixel boundaries and prevent color mixing. 2.
Red photoresist coating is applied to CF glass substrate to create red pixels. 3. After removal of excess photoresist coating by the developing solution, the pattern is cured through baking. 4. Steps 2 and 3 are repeated using the green photoresist coating and blue photoresist coating to create green and blue pixels. 5. Overcoat layer is applied to create flat, uniform surface. 6. Photo spacer is formed using photolithography to control the cell gap between the CF and TFT array substrates.
Production of the TFT-LCD cell substrate. 1. Polyimide layer is printed onto both the TFT array substrate and the CF substrate and baked. 2. The PI layer is photo-aligned so that it will align the liquid crystal molecules in the correct direction, then baked. 3. TFT array and CF substrate are baked to cure the PI layer. 4. Sealant is applied to the surface of the CF to create the boundaries in which the liquid crystal will be contained. 5. Liquid crystal is dispensed onto the TFT array. 6.
The CF substrate is assembled on top of the TFT array, and the two substrates are sealed together to securely encase the liquid crystal. 7. The seal is cured. The back end of line (BEOL) processing that takes place in China includes the following: 1. Cutting. 2. Cleaning. 3. Polarizer attachment. 4. Light-On Test. 5. Packing for transport to liquid crystal module (LCM) processing. The (LCM) processing (Bonding and Assembly) includes the following: 1.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359896).