The country of origin of bimetal hole saws
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your submission dated March 20, 2026, you requested a country of origin ruling for purposes of Section 301 duties, other tariffs and marking. Pictures and descriptions of the manufacturing processes were included in your submission. The products under consideration are bimetal hole saws of various diameters. Each hole saw is made of a High Speed Steel (HSS) strip and a High Carbon Steel (HCS) strip that are welded together and rolled to form the round body of the hole saw.
The HSS strip end of the hole saw incorporates milled cutting teeth, while the HSC strip end incorporates a cap and adapter. The adapter enables the hole saw to connect to the mandrel system of a power tool.
You have stated that the HHS strips and HCS strips will be purchased from multiple foreign suppliers and that your company will assemble the subject bimetal hole saws in China, Germany and Switzerland under the following four production scenarios: Production Scenario 1: The HHS strip and HCS strip are welded together in Germany, and cutting teeth are milled into the HSS side. The product is then sent to China for final finishing.
This includes bending the cutting teeth to the left and to the right, punching slots into the sides of the saw blade strip, and punching the saw blade strip to its correct length, depending on the diameter of the hole saw. The saw blade is then rolled and formed to become round, and it is heat-treated. Next, the ends of the rolled body are welded together, and the body and the cap are welded together along with the adapter.
The hole saw is then painted, tempered, treated with rust protection oil and brand information is printed on the body. Finally, the finished hole saw is packaged for export to the United States. Production Scenario 2: The HHS strip and HCS strip are welded together in Germany, and cutting teeth are milled into the HSS side. The cutting teeth are then bent to the left and right before the article is sent to China for final finishing.
This includes bending the teeth to the left and to the right, punching slots into the sides of the saw blade strip, and punching the saw blade strip to its correct length, depending on the diameter of the hole saw. The saw blade is then rolled and formed to become round, and it is heat-treated. Next, the ends of the rolled body are welded together, and the body and the cap are welded together along with the adapter.
The hole saw is then painted, tempered, treated with rust protection oil and brand information is printed on the body. Finally, the finished hole saw is packaged for export to the United States. Production Scenario 3: The HHS strip and HCS strip are welded together in China. The welded product is then sent to Germany where cutting teeth are welded into the HSS side. The article is subsequently returned to China for final finishing.
This includes bending the teeth to the left and to the right, punching slots into the sides of the saw blade strip, and punching the saw blade strip to its correct length, depending on the diameter of the hole saw. The saw blade is then rolled and formed to become round, and it is heat-treated.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359916).