The tariff classification of a rotary geared actuator from the United States
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the Rotary Geared Actuator, Part Number 178800-xxx, will be 8807.30.0030, HTSUS, which provides for “Parts of goods of heading 8801, 8802, or 8806: Other parts of airplanes, helicopters or unmanned aircraft: For use in civil aircraft: Other.”.
Ruling text
In your letter dated March 20, 2026, you requested a tariff classification ruling. The item under consideration has been identified as a Rotary Geared Actuator, Part Number 178800-xxx, also called a flap actuator assembly, is comprised of a two-stage gear reduction system, that operates the leading-edge flaps of the Boeing 747 aircraft. The actuator functions to transmit flap drive torque to the linkage system of the lead edge flaps. Each unit is driven by torque from a torque tube.
Torque tube rotary motion is also transmitted through the actuator assembly to the next inline actuator. The actuator is situated along with the bay door drives, and also can be used for controlling leading or trailing edge movements of the aircraft. It receives power drive unit torque via assembly of shafts and joints. From a mechanical standpoint, the actuator can be termed as an epicyclical gear reducer or compound planetary gearbox.
The 178800-xxx is purely mechanical and does not include any hydraulics, pneumatics, or electronics. It functions based on standard gearing principles providing a specific gear ratio in a smaller form factor. It does not rely on an external hydraulic or pneumatic power source in order to operate. It does not include a valve, a motor or a position sensor. The actuator is situated along with the bay door drives, and also can be used for controlling leading or trailing edge movements of the aircraft.
It receives power drive unit torque via assembly of shafts and joints. From a mechanical standpoint, the actuator can be termed as an epicyclical gear reducer or compound planetary gearbox. You state that the 178800-xxx actuator was manufactured in the United States; however, it is not currently in production. It will be imported into the United States for repair or overhaul from Boeing 747 aircraft operators in Japan, Germany, Luxembourg, Hong Kong, and other countries.
You presented two headings under the Harmonized Tariff Schedule of the United States (HTSUS) for the rotary geared actuator: heading 8483, HTSUS, which provides for gear boxes and other speed changers, including torque converters, and heading 8807, HTSUS, which provides for parts of aircraft. You suggest that the rotary geared actuator is correctly classified in heading 8807, because “Note 1(l) to Section XVI excludes articles of Section XVII, which includes aircraft and its parts, from this section.
Furthermore, the Explanatory Notes to heading 8483 exclude, "Transmission equipment of the kinds described above (gear boxes, transmission shafts, clutches, differentials, etc.), but which are designed for use solely or principally with vehicles or aircraft (Section XVII); it should, however, be noted that this exclusion does not apply to internal parts of vehicle or aircraft engines - these parts remain classified in this heading."” We agree.
The applicable subheading for the Rotary Geared Actuator, Part Number 178800-xxx, will be 8807.30.0030, HTSUS, which provides for “Parts of goods of heading 8801, 8802, or 8806: Other parts of airplanes, helicopters or unmanned aircraft: For use in civil aircraft: Other.”. The general rate of duty will be Free.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359923).