The tariff classification of a yoke from South Korea
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The general rate of duty will be 2.8 percent ad valorem.
Ruling text
In your letter dated March 23, 2026, you requested a tariff classification ruling, on behalf of your client, HL Mando Corporation. The item under consideration is a pinched bolt yoke imported in two different conditions: finished and pre-machined. The yoke is a U-shaped item that consists of a base and two sides that feature circular earholes.
It is primarily constructed of steel material and is part of a universal joint that is used in various applications, such as machine tools, construction machinery, propeller drive systems and automation equipment. When imported in a pre-machined condition, the yoke is unfinished and will need to undergo drilling and machining operations to complete areas, such as the bore hole located at the base and the earholes.
Merchandise is classifiable under the Harmonized Tariff Schedule of the United States (HTSUS) in accordance with the General Rules of Interpretation (GRIs). GRI 1 states in part that for legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes. GRI 2(a) extends the scope of the HTSUS headings to include unfinished parts, provided the unfinished parts have the essential character of the finished parts.
GRI 2(a) further states that: Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as entered, the incomplete or unfinished article has the essential character of the complete or finished article. It shall also include a reference to that article complete or finished (or failing to be classified as complete or finished by virtue of this rule), entered unassembled or disassembled.
In addition, Explanatory Note (EN) II under GRI 2(a) states that: The provisions of this Rule also apply to blanks unless these are specified in a particular heading. The term “blanks” means an article, not ready for direct use, having the approximate shape or outline of the finished article or part, and which can only be used, other than in exceptional cases, for completion into the finished article or part.
Semi-manufactures not yet having the essential shape of the finished articles (such as is generally the case with bars, discs, tubes, etc.) are not regarded as “blanks.” Accordingly, two criteria which an article must meet in order to be classified as a blank for purposes of GRI 2(a) are (1) it must possess the approximate shape or outline of the finished article, and (2) the sole use must be for completion into the finished article.
In this case, GRI 2(a) is applicable to the yoke when imported in a pre-machined condition, as it will meet the criteria stated above at the time of importation. It will have the approximate shape or outline of a finished yoke and cannot be used for any other purpose. In a pre-machined condition, the yoke will be readily recognizable as the finished article, and there is nothing to suggest that in this condition, the yoke has any practical use other than as a finished yoke used in a universal joint.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359979).