The country of origin of indoor air conditioning units
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated March 30, 2026, you requested a country of origin ruling on behalf of your client, Hisense USA Corp. The products at issue are two indoor air conditioning units, item AUH-36UX3TDH3 and AUH-36UX3RDH1. Both units consist of a rectangular shaped metal housing that contains a fan assembly, an electrical box and an evaporator primarily constructed of copper or aluminum material.
The final assembly for both units occurs in Thailand and follows the same assembly sequence, as the units are configured identically. Before final assembly, various subassemblies are completed using components from China and Thailand. For instance, raw copper tubing and aluminum for the copper evaporator are sourced from China and undergo complete fabrication and assembly in Thailand. The fabrication process begins by stamping aluminum foil into fins.
Chinese-origin copper tubes are then cut, bent into U-shapes, and inserted through the stamped fins. The resulting assembly is then placed into a tube-expansion machine, which mechanically expands the copper tubes against the fins. After expansion, the evaporator is dried, degreased, and brazed. Subsequently, short U-tubes and elbows are joined to the coil using brazing equipment. The completed coil then undergoes testing, a final inspection, and packaging.
To produce the aluminum evaporator, two flat aluminum plates are mechanically fastened using support plates and a top plate to form a V-coil structure. The inlet and outlet aluminum pipe assemblies, sourced from China, are manually reshaped, reangled, and inserted into the coil’s flared openings to achieve the required weld depth and positioning. Brazing is then completed, and the thermostatic expansion valve assembly is subsequently positioned and welded to the inlet tubes.
Next, the entire coil undergoes leak detection, finishing and packaging. The production process of the printed circuit board assembly (PCBA) begins by completing a solder paste printing process. Afterwards, the components are placed onto circuit boards using surface-mount technology. This step is followed by reflow soldering and the completion of an inspection. Additional components are installed using plug-in operations, after which the assemblies undergo wave soldering.
Each PCBA is subjected to an inspection, any necessary rework and in-circuit testing. Completed PCBAs undergo programming. The sheet metal components, which consist of the framework and housing, are fabricated using Chinese and Thai sourced galvanized steel coils and powder coatings. The process begins by loading raw steel coils into cutting and stamping machinery to notch, punch and form the required panel geometries. The cut panels are then bent to precise tolerances and spray coated.
For the fan assembly, the production starts by welding the side plates to other designated plates by applying spot welds along the perimeter and then removing any burrs. Afterwards, the welded assemblies are cleaned and painted. The impeller is then secured to the volute tongue plate using screws. Once complete, each assembly undergoes an inspection.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N360198).