The country of origin of digital stick thermometers
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated April 2, 2026, on behalf of your client, Fortunit Creative Co., Ltd., you requested a country of origin ruling on digital stick thermometers. Descriptive literature was provided for our review. The items under consideration are described as digital stick thermometers (models DMT412, DMT418, DMT437, and DMT4119), which are intended to measure the human body temperature orally, rectally or under the arm.
The devices are reusable and designed for clinical or home use on people of all ages, including children under 8 years old with adult supervision. During operation, the user positions the thermometer’s thermistor probe at the measurement site. As the temperature of the heat source changes, the thermistor’s resistance varies accordingly. This resistance change is then converted and processed, displaying the measured temperature digitally on the screen while simultaneously activating a buzzer.
Each of the four models are substantially similar with only a slight change in size and material. The DMT412 has a rigid tip and measures 12.4cm by 1.8cm by 1.1cm. The DMT 437 has a flexible tip and measures 12.4cm by 1.9cm by 1.1cm. The DMT418 has a rigid tip and measures 13.9cm by 2.3cm by 1.2cm and has a 21.7cm by 9cm screen. The DMT4119 also contains a rigid tip but measures 13.9cm by 2.3cm by 1.3cm and has a 22.6cm by 9.7cm display.
Each of the thermometers are manufactured with components from Cambodia, China and Taiwan. The Cambodian-origin components include the enclosure, cover, dustproof case, chip on board (COB) and packaging. The Chinese-origin components include the mechanical thermometer (MT) movement, LCD, MT sheath, inner film, MT plunger, O-ring, buzzer, positive and negative conductive shrapnel, conductive bar, conductive point, battery, and positive and negative battery clamps. The sensor can be of Chinese or Taiwanese origin.
The manufacturing process is conducted in Cambodia, commencing with MT COB bonding. Following a cleaning step, a chip is precisely aligned onto the printed circuit board (PCB) and secured using a hot press welding process. The operation then transitions to MT COB welding and sensor integration. MT COBs are arranged on a plate fixture, and MT sensors are subsequently positioned on a layout fixture. These components are then soldered via an automated rotational cycle welding system.
The subsequent stage involves MT movement assembly. The MT movement, with an integrated battery holder, is introduced into the movement vibration player and fed into the assembly machine. The positive and negative conductive spring pieces of the buzzer sheet, along with the conductive strip, are then fed into the machine. Next, the welded COBs are transferred to a conveyor belt, initiating the hot-pressing phase.
A plunger is then inserted into the case, aligned with the sensing wire, until fully seated, ensuring the sensing wire protrudes above the thermometer head. The black head of the sensor is dipped in adhesive and pressed into the opening of the middle case. Finally, the thermometer head is pressed into its sheath, confirming the black end of the sensing wire is seated at the bottom of the steel sheath.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N360390).