The country of origin of a battery tester
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated April 10, 2026, you requested a country of origin ruling on a battery tester. Descriptive literature was provided for our review. The item under consideration is described as a battery tester (model BT103A), which is a handheld electronic device and diagnostic tool designed for testing the load, condition, and starter motor draw of 6V and 12V lead-acid batteries up to 1000 CCA.
It provides a complete charging system diagnosis for vehicles such as cars, recreational vehicles (RVs), and motorcycles, features a top-mounted rocker switch, a 0-16VDC meter, and heavy-duty, color-coded clamps. The unit is constructed with a ventilated baked enamel steel case and includes a voltmeter, resistance wire, test gauge, copper wire, and clamp cables. When conducting a battery load test, the user first determines whether the dial pointer is point at zero on the meter scale.
The positive (red) clamp of the tester is connected to the positive terminal of the battery, followed by connecting the negative (black) clamp to the negative terminal of the battery. Once both clamps are connected, the user then pushes the spring-loaded switch to the on position and holds the switch for at least 10 seconds. While the switch is in the on position, the user then checks the 6-volt or 12-volt section of the meter scale to identify the voltage level and condition of the battery.
The battery tester is produced with components from China and Vietnam.
The Chinese-origin components include clamp plates, top and bottom covers (black powder-coated), handles in red and black color, voltmeter (0-16V), rocker-type reset switch, resistance wire, a variety of screws, hex head bolt and washer assembly, and nuts, PVC pure copper singled wires with various OT and locking terminals, PVC copper-clad aluminum cable clips and terminals, black PVC wire, OT terminals and brass tin-plated locking flat female terminals, PVC pellets, and mica sheet.
The Vietnam-origin components consist of single copper wire, PVC wires in black and red, 600V black heat shrink tubing, tin-plated brass terminal blocks and disc terminals, locking flat female terminals, packaging materials, labels, and instructions manual. The manufacturing process, conducted in Vietnam, begins with the mounting of mica sheets onto the resistance wire.
This involves clamping the resistance wire to the sheets, followed by securing the red OT terminal wire and red clip wire to the right side of the resistance wire with an M5 nut. Concurrently, a fixed black OT terminal wire with a locking mechanism is secured to the left side of the resistance wire, also using an M5 nut. An inspection then ensures the secure fixation of the resistance wire and terminal connections.
Subsequently, the resistance wire and mica sheet assembly are installed into the upper housing’s mounting slots. This is followed by the installation of the power switch and the affixing of labels, preceding the careful positioning and installation of the voltmeter. The voltmeter undergoes a thorough inspection to confirm the dial surface is free of scratches or damage, and that its mounting studs are secure and undeformed.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N360603).