The tariff classification of a wheeled excavator carrier from Finland
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Key passages, quoted from the ruling
- The applicable subheading for the wheeled excavator carrier will be 7326.90.8688, HTSUS, which provides for “Other articles of iron or steel: Other: Other: Other: Other: Other.” The general rate of duty will be 2.9 percent ad valorem.
Ruling text
In your letter dated March 17, 2026, you requested a tariff classification ruling. Technical material was submitted with your request. The item under consideration is a wheeled excavator carrier, series designation Sleipner E50. It is a specialized, high-speed, wheel-based transport system designed to move 28 - 58 ton heavy duty tracked excavators around mining or quarry environments. When in use, a carrier is attached to the rear portion of the left and right tracks of the excavator.
Once secured in place the excavator uses its boom and bucket to secure itself in the rear bed of an articulated dump truck (ADT) and lift the front portion of the tracks. Once the excavator is secure, the wheels on the carriers can move freely, letting the ADT tow the excavator to another location without the use of excavator’s tracks. It acts like a set of “roller skates,” allowing excavators to be pulled up to 15 kilometers an hour which reduces travel time and extends the life span of the tracks.
Each carrier is equipped with a steel track shoe and supported by two rubber tires. The frame of the shoe is in the shape of a scoop which allows the excavator’s track to roll into the shoe. It is flat on the bottom and bends vertically into two triangular shaped sides. Along the top of the shoe, both sides are joined together with a horizontal steel bar spanning the width of the shoe creating a gap between the bottom and the top. The outer face of each side is fitted with axles and hubs for the wheels.
Each carrier is made up of 85% steel, and 15% rubber parts. In your submission, you suggest the classification of the carrier be classified under subheading 8716.80, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Trailers and semi-trailers; other vehicles, not mechanically propelled; and parts thereof: Other vehicles.” We disagree.
The Explanatory Notes (EN) to heading 8716 state, “this heading covers a group of non-mechanically propelled vehicles (other than those of the preceding headings) equipped with one or more wheels and constructed for the transport of goods or persons.
It also includes non-mechanical vehicles not fitted with wheels (e.g., sledges, special sleds running on timber trackways).” The ENs also state, “the vehicles of this heading are designed to be towed by other vehicles (tractors, lorries, trucks, motorcycles, bicycles, etc.), to be pushed or pulled by hand, to be pushed by foot or to be drawn by animals.” This carrier does not fall into any of the categories of non-mechanically propelled vehicles given as exemplars.
The carrier is not designed to be “towed by other vehicles, to be pushed or pulled by hand, to be pushed by foot or to be drawn by animals.” The carrier is used to add wheels to an excavator using its boom to secure itself in the rear bed of the ADT with the help of crushed rocks, or other appropriate material, as a result the machine i.e. excavator itself becomes the “trailer.” It is the opinion of this office that the wheeled excavator carrier is precluded from heading 8716, HTSUS.
We note that the carrier is composed of various materials.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N360648).