The country of origin of nickel-titanium wire
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the nickel-titanium wire and strip (flat wire) will be 7505.22.1000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Nickel bars, rods, profiles and wire: Wire: Of nickel alloys: Cold-formed.
- The general rate of duty will be 3 percent ad valorem.
Ruling text
In your letter dated April 23, 2026, you requested a country of origin ruling on behalf of your client, Confluent Medical Technologies. The products under consideration are identified as nickel-titanium (NiTi) wire and nickel-titanium (NiTi) strip (flat wire), which are made to ASTM F2063. You indicate these products are used in medical devices and surgical implants.
The applicable subheading for the nickel-titanium wire and strip (flat wire) will be 7505.22.1000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Nickel bars, rods, profiles and wire: Wire: Of nickel alloys: Cold-formed. The general rate of duty will be 3 percent ad valorem. According to your submission, the nickel-titanium alloy is melted and poured in the United States (U.S.) and formed into an ingot. The ingot undergoes hot-forging operations until it forms a billet.
The billet is hot-rolled into a 0.25-inch diameter wire rod. Next, the nickel-titanium alloy is cold-drawn into 0.118-inch diameter wire. The wire is exported to India where it undergoes further cold drawing into diameters ranging from 0.040 inch to 0.001 inch. Lastly, the wire is spooled and exported back to the U.S. The nickel-titanium strip (flat wire) undergoes the same manufacturing process as the wire described above. The 0.118-inch wire is shipped to India where it is cold-drawn to a diameter of 0.038 inch.
Next, the wire is shipped back to the U.S. where it is rolled into flat wire measuring 0.0145-inch thickness x 0.059-inch width. The strip (flat wire) is exported to India where is it straight annealed, cut and exported back to the U.S. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Based on the facts presented, the additional drawing of wire does not substantially transform the wire that originated in the U.S. The court in Superior Wire v. United States, 669 F. Supp. 472 (CIT 1987), aff'd, 867 F.2d 1409 (Fed. Cir. 1989), held that the drawing of wire rod into wire did not constitute a substantial transformation, as there was no significant change in the use or character of the wire, and only a relatively insignificant change in name.
The wire rod and the first stage of cold drawing of wire is produced in the U.S. Moreover, we find that the additional operations performed in India such as further drawing, annealing, and/or cutting are not complex enough to constitute a substantial transformation. Therefore, the country of origin of nickel-titanium wire and strip (flat wire) is the United States. If a good is determined to be an article of U.S.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N360963).