The tariff classification of wheeled propane tanker from Mexico
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Ruling text
In your letter dated May 5, 2026, you requested a tariff classification ruling on behalf of your client, Triarc Tank, LLC, located in Lewisville, Texas. The item under consideration has been identified as a propane tanker trailer, schematic drawing LL74001050001, that allows end-users to pump propane fluid through a secured coupling into the tank, which compresses the contents, allowing for the contents to be extracted from a dedicated service valve when desired.
You state that tank volume is monitored through a float gauge and can be adjusted with a release valve and regulator. The precise suite of valves and gauge ports can be adjusted per customer specification. The suite of valves at the top of the tank can also be covered with a steel or plastic dome to cover and protect the valves.
When shipped into the United States, these tanker trailers consist of the tank body, the wheels, a suite of valves, an A-frame tow bar assembly, and a ball trailer coupler, which is specially designed to allow the tanker trailer to be towed by a motorized vehicle with a 2” trailer ball hitch. The ball trailer coupler features a spring-loaded collar with a lock-and-pin mechanism to secure it to the corresponding trailer ball hitch of the towing vehicle.
The ball trailer coupler is certified as meeting SAE Class III specifications and has a maximum load capacity of 5,000 pounds. The associated A-frame tow bar, which is affixed to the front wheel brackets of the tanker trailer, is designed to keep safe, consistent, spacing between the towing vehicle and the tanker trailer.
This attachment allows the propane to be transported and used in an off-road setting for applications such as: Heating various facilities (such as livestock housing) Powering certain machinery Drying harvested grains/crops; and Flame-clearing fields You state that because these propane trailers are mobile, they eliminate the need for separate propane tanks at each task location. The tanker trailers tanks are produced to the following industrial standard: ASME Section VIII, NFPA 58, NBIC.
The heads and shells of the tank portion of the propane trailer are produced from hot rolled coil (“HRC”), typically SA-414C (Carbon Steel); the tank heads are typically made from SA-285C HRC (Carbon Steel); and the shells are typically made from SA-455 HRC (Stainless Steel).
The non-steel components consist of valves, gauges, coatings (epoxy primer, and polyester topcoat), weld wire, flux, and decals The applicable subheading for the propane tanker, schematic drawing LL74001050001, will be 8716.31.0000 Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Trailers and semi-trailers; other vehicles, not mechanically propelled; and parts thereof: Other trailers and semi-trailers for the transport of goods: Tanker trailers and tanker semi-trailers.” The general rate of duty will be Free.
The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N361291).