The country of origin of an inflator hose adapter
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the inflator hose adapter will be Malaysia.
Ruling text
In your letter dated June 3, 2026, you requested a country of origin ruling on an inflator hose adapter. The inflator hose adapter, SKU SP006, is designed to inflate and deflate vehicle tires. The adapter features a metal connector and is comprised of a shell that contains a valve (a pigtail end, a pin, one of two ferrules, and a rubber gasket), a flexible hose and a handle that toggles the valve core.
In use, the adapter provides a secure, leak-proof seal between the inflator and tire for the purpose of making pressure adjustments on inflatable equipment and tires of cars, motorcycles and bicycles. With respect to origin, the inflator hose adapter is assembled in Malaysia using a hose and a rubber gasket from China and components from Malaysia. The plastic components, which include the pigtail end, the pin and the handle, are produced using an injection molding process.
The connector, the ferrules and the shell are formed by stamping the metal blanks. Once shaped, the metal components undergo an electroplating process. The rubber hose from China is cut to specific lengths. Final assembly involves manually assembling a cut to length hose with plastic and metal components, which includes inserting a rubber gasket. Afterwards, the components are pressed together using a hand-operated punch press and sealed using a crimping tool.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlaender & Co., 27 C.C.P.A. 297, 302 (1940).
Part 134 of the U.S. Customs and Border Protection (CBP) Regulations (19 CFR 134) implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362022).