The country of origin of a paint sprayer
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 7, 2026, on behalf of your client, Chervon North America, Inc., you requested a country of origin ruling on a paint sprayer. Descriptive literature was provided for our review. The item under consideration is described as a paint sprayer, which is a high-volume, low-pressure (HVLP) handheld electric sprayer designed to atomize low-viscosity liquids into a fine mist for finishing applications.
The sprayer is intended for spraying interior and exterior walls, floors, furniture, wooden products, railings, doors, windows, cabinets, tables, chairs, and other small to medium-sized areas commonly encountered in residential and light commercial finishing work. In operation, the motor generates air pressure where a portion enters the tank through the intake pipe forcing the liquid through the siphon tube to the nozzle.
Simultaneously, another portion of the air pressure atomizes the liquid exiting the nozzle into a fine mist for application.
The paint sprayer itself consists principally of an ergonomic plastic handle and motor housing, an on/off switch and switch lever assembly, a paint container with internal suction tube, a flow control knob, a tip collar, an air cap, a set of interchangeable nozzles (1.3 mm, 1.5 mm, 2.0 mm, and 2.5 mm sizes), a spray width control lever, a filter and filter housing, an air tube and check valve assembly, and a brushless motor and printed circuit board assembly (motor/PCBA) housed within the motor enclosure.
The product has a maximum flow rate of 833 ml/min (28 oz/min) and a paint container capacity of 1,200 ml (40 fl. oz.). The 24V 2.0 Ah lithium-ion battery pack is a removable rechargeable battery designed for use with the sprayer and other compatible Kobalt 24V cordless tools. The battery pack incorporates protection circuitry that guards against extreme temperature, over-discharge, and overcharge conditions, and features a four-LED power indicator that displays the remaining state of charge.
The compatible battery charger is an AC-powered charging station that recharges a fully discharged 2.0 Ah battery pack in approximately 85 minutes. The battery pack and charger are designed to interlock with the bare tool and with each other through specified raised ribs and slots, ensuring proper electrical contact during use and during charging. Components and subassemblies for the paint sprayer kits are sourced from Thailand, Vietnam, China, and Malaysia, with final integration occurring in Thailand.
The most critical subassembly, the brushless motor and printed circuit board assembly (PCBA), is manufactured in Vietnam. The Vietnamese operations for the motor/PCBA assembly encompass a comprehensive process, including automated press-fitting of balance rings and bearings onto the rotor shaft, automated adhesive dispensing and magnet installation, and dynamic balance testing with material removal for out-of-tolerance rotors.
This is followed by machine winding of enameled wire onto stator laminations, terminal crimping, and stator testing via a diagnostic instrument.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362121).