The tariff classification and country of origin of multilayered wood flooring
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The general rate of duty will be 8 percent ad valorem.
Ruling text
In your letter, dated June 15, 2026, you requested a binding tariff classification and country of origin ruling on multilayer wood flooring. Product information and images were submitted for our review. The product under consideration is multilayer wood flooring. The flooring consists of three layers of wood. The face veneer measures 3.5mm in thickness and consists of red oak, white oak, or hard maple, all nonconiferous woods. The core consists of blocks of red pine, SPF, or linden measuring 13.5mm in thickness.
The back ply consists of a 2mm-thick layer of eucalyptus or linden, also nonconiferous woods. The grain of each layer runs at a 90-degree angle to that of the adjacent layers. The panels are tongued and grooved on their edges and ends. A clear, UV-cured coating that does not obscure the grain is applied to the panels. In understanding the language of the Harmonized Tariff Schedule of the United States (HTSUS), the Explanatory Notes to the Harmonized System (ENs) may be utilized.
The ENs, although not dispositive nor legally binding, provide a commentary on the scope of each heading of the HTSUS, and are the official interpretation of the Harmonized System at the international level.
See T.D. 89-80, 54 Fed. Reg. 35127, 35128 (August 23, 1989). “Plywood” is defined in the ENs for heading 4412, HTSUS: a panel “consisting of three or more sheets of wood glued and pressed one on the other and generally disposed so that the grains of successive layers are at an angle.” This definition describes the instant panels.
The ENs also describe “blockboard” as panels “in which the core is thick and composed of blocks, laths or battens of wood glued together and surfaced with the outer plies.” This also describes the instant panels. Both plywood and blockboard are specifically provided for in heading 4412 of the HTSUS.
You suggested classification in heading 4418, however, Additional US Note 4(b) to Chapter 44 indicates that assembled multilayer wood flooring is only classified in heading 4418 when the face ply measures more than 4mm in thickness. Because the face ply measures only 3.5mm in thickness, the flooring remains classified in heading 4412.
The applicable subheading for the multilayer wood flooring panels will be 4412.52.3105, HTSUS, which provides for Plywood, veneered panels and similar laminated wood: Blockboard, laminboard and battenboard: Other, with at least one outer ply of nonconiferous wood: Plywood: Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: Other: Wood flooring. The general rate of duty will be 8 percent ad valorem.
In your letter, you outline a scenario wherein wood sourced from multiple countries is manufactured into multilayer panels in Canada. The back plies are peeled in Paraguay, the core blocks are manufactured in Canada, and the face plies are sawn in Canada. The panels are laid up, glued, tongue and grooved, and finished in Canada. Section 304 of the Tariff Act of 1930, as amended (19 U.S.C.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362347).