The country of origin of a lithium-ion portable jump starter and battery pack
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 23, 2026, you requested a country of origin ruling. The portable jump starter and battery pack, model number K23, consists of a lithium-ion battery pack encased in a two-piece plastic housing with a power button, LED lamp, USB-A output port, and USB-C input charging port. It has a 10,000 mAh capacity, a nominal voltage of 14.8 VDC, an energy capacity of 38.5 Wh, and is designed to provide up to 1,000 peak amps.
This device also serves as a power bank, charging electronic devices via its USB-A port. The jump starter will be assembled in Thailand using Chinese and Thai components. The Thai components include a printed circuit board assembly (PCBA), an upper plastic shell, and a lower plastic shell. The main Chinese components include the lithium-ion pouch cells, an LED lamp, a USB charging cable, and a booster cable with alligator clamps.
Additional components, such as silicone covers for the ports, a light reflector, lens, screws, wires, and tape, are also sourced from China. The assembly process begins in Thailand with workers bundling four battery cells together, soldering a wire assembly with a terminal pin connector, soldering a wire assembly with an EC5 receptacle, and applying heat shrink. The finished battery pack is connected to the PCBA, and both components are secured to the lower shell using screws.
Next, the LED lamp assembly, which allows the jump starter to function as a light source, is connected to the PCBA. Anti-slip pads are attached to the upper shell, which is then fastened to the lower shell with screws. The assembled unit is inspected, tested, labeled, and packaged with the detachable booster cable and a USB charging cable.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). CBP has held that whether an assembly process is sufficiently complex to rise to the level of a substantial transformation is determined upon consideration of all the operations that occur within that country.
Based on the information in your submission, the final assembly operations that occur in Thailand are not complex. Turning to the components of the jump starter, we find that the primary components are the Chinese battery cells, which perform the principal function of maintaining an independent source of electricity to deliver sufficient current to start automotive vehicles or charge electronic devices.
Therefore, based on the totality of the circumstances, the country of origin of the subject portable jump starter, model number K23, is China.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362495).