The tariff classification of augers and parts of augers from Germany
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 23, 2026, you requested a tariff classification ruling on behalf of your client, EMDE Bohrtechnik Nentershausen GmbH. The items under consideration are two auger parts and two complete augers. The finished augers are parts of drilling machines that, when fully assembled, perform rock drilling and earth boring functions. The components are primarily made of steel, and their descriptions and functions are listed below.
The CFA Starter, part no. 500015384, is a helical blade on a central shaft made of steel with additional auger dragon teeth. It attaches at the end of an auger, and is designed to cut, break, and displace soil or rock during the creation of deep foundation piles. It attaches to the bottom of the CFA Auger, providing initial contact with the ground and dictating the drilling precision and speed.
You have stated that the cutting part of the CFA Starter contains by weight 0.1 percent of chromium and molybdenum (each), 0.41 percent tungsten, and no vanadium. The CFA Auger, part no. 500015407, is a helical blade on a central shaft made of steel and attaches to the CFA Starter. The length added by the CFA Auger, combined with the CFA Starter, allows the auger to reach full depth in a single motion, bringing soil up the flights while maintaining soil pressure on the borehole walls.
Concrete (or grout) can then be pumped through the hollow center of the auger stem while it is being removed, filling the hole from the bottom up to prevent collapse. The auger remains in the ground until the moment of concrete injection, providing continuous support to the hole and reducing the need for temporary casings. You have stated that the cutting part of the CFA Auger contains by weight less than 0.1 percent of chromium and no molybdenum, tungsten, or vanadium.
The Full Displacement Auger, part no. 500008955, is a helical blade on a hollow shaft made of steel that attaches to the rotary head of a drilling machine via an extension rod. It is used in foundation engineering to create cast-in-place concrete piles. Instead of excavating soil like traditional methods, it rotates and presses into the ground, compressing the surrounding soil outward to form a dense, compacted borehole without bringing drilling spoils (waste dirt) to the surface.
The Full Displacement Auger temporarily supports the borehole during drilling, reducing collapse risk; upon reaching the desired depth, concrete is pumped through the hollow stem as the auger is withdrawn to form solid, monolithic concrete pile. The combination of soil densification and the textured borehole wall created during extraction significantly improves the pile’s friction and overall weight-bearing capacity.
You have stated that the cutting parts of the Full Displacement Auger contain by weight 0.44 percent chromium, 0.20 percent molybdenum, 0.30 percent tungsten, and no vanadium. The Soilmix Auger, part no. 500021553, is an auger used in deep foundation and ground improvement projects to mechanically shear in-situ soil and blend it with a binding agent like cement or bentonite slurry. This creates, directly in the ground, a homogeneous, engineered soil-concrete mixture.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362513).