The tariff classification of feeding machines from Canada
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 24, 2026, on behalf of your client, Camar Mill Systems Limited, you requested a tariff classification ruling. Please note, this letter is part of a split ruling. The post pellet liquid applicator and swing scout will be addressed in a separate ruling. The mass flow meter, spot filters, and tote micro ingredient system will be addressed herein.
The first item under consideration is described as the Camar Mass Flow Meter, which operates as a continuous, dynamic weighing system designed for dry, bulk products. In operation, material falls onto a highly sensitive stainless steel sensing plate, and the impact force created by the material’s continuous flow is measured, converted, and translated into a precise mass flow rate and totalized weight.
The dry mass flow meter is built using a stainless-steel sensing plate, painted carbon steel housing, along with a 7-inch touch screen display, sensor interface and a signal calibration, linearization and filtering control, and interface. A remote access router is available for remote support and the control panel is imported prewired.
The equipment also features a product inlet flow conditioner, inlet flexible connection with flange and product guide, as well as a discharge flexible connection with flange and product guide controller. The mass flow meter incorporates a load cell with a 10kg max weight as well as the electronics needed to display an accurate weight and flow rate. The second items under consideration are described as Camar Spot Filters, which include three different variants.
Two of the filters are mounted vertically with one being designed to attach to the top of a bin and the other designed to be attached to a bucket elevator. The third filter is mounted horizontally and designed to be attached to the top of a conveyor or mixer. The Camar Spot Filters have a small baghouse style dust collection system designed to provide compact dust control.
Each spot filter is outfitted with a pulse-jet air system to self-clean the filter bags and deposit the dust back into the system it pulled from. The filters are designed to keep the equipment it is attached to in a negative pressure to prevent dust from escaping. The third item under consideration is described as the Camar Tote Micro Ingredient System, which is a specialized equipment set designed for feed mills to accurately measure small quantities of ingredients for animal feed.
This system allows for a large bulk bag (FIBC Tote) to be suspended over the opening to a batching auger. This batching auger then dispenses product from the bulk bag into the digital scale supported by load cells and featuring a digital display. The digital scale operates strictly on a batch-by-batch basis (not continuous weighing). Once weighed, the material drops from the scale hopper into a pneumatic conveyance line for direct transfer to the primary feed mixer.
The scale hopper typically has a capacity of 220 lb. and a minimum capacity of 0.05 lb.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362556).