The country of origin of an electric scissor lift
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, the country of origin of the electric scissor lift, model number 120XEN, will be Thailand.
Ruling text
In your letter dated June 26, 2026, you requested a country of origin ruling. The merchandise under consideration is identified as an electric scissor lift, model number 120XEN, and is described as a self-propelled aerial work platform for lifting personnel or materials. Its main components include a platform, a mobile chassis, and a lifting mechanism with crisscrossed beams. The unit has a working height of 12 meters and measures approximately 2.48 meters in length, 1.15 meters in width, and 1.92 meters in height.
The subject scissor lift will be produced in Thailand using components sourced from China and Thailand. The production process begins with preassembling the platform assembly, scissor arm assembly, and chassis assembly. In Thailand, the structure of the platform assembly will be created from standard stock forms, such as steel plates and steel tubes. Blanks are cut from steel plates, formed into three-dimensional components using a press brake, and then machined using a CNC machining center.
The steel tubes are cut, bent, drilled, and machined into guardrails. These semi-finished components are then welded into the platform assembly, which is then shot blasted and powder coated. The scissor arm assembly will be assembled using Chinese and Thai components. In China, steel plates are cut into flat two-dimensional blanks, and steel tubes are cut to length and drilled. After they are machined, the components will be sent to Thailand.
At this stage, these semi-finished components are in their final shapes, requiring only cleaning, shot blasting, and powder coating before assembly. The components are welded or fastened to form the scissor arm assembly. While a Thai scissor pole and two Thai repair arms will be used during this assembly process, the remaining mechanical components such as the lifting cylinder, drive shafts, angle sensors, and valve assemblies will all be sourced from China.
The frame of the chassis assembly will be produced in Thailand, where steel plates and steel tubes are transformed into intermediate components and then welded together. Additional components, such as the fuel tank door, various covers, brackets, mounting plates, levers, and rods are also fabricated from common metal forms in house.
These components are incorporated into the frame along with a control module, travel motor, electric motor, oil pump, valve assembly, counterweight, a lithium-ion battery, and a charging unit. Workers also complete the electrical system, which includes installing and connecting wiring harnesses, switches, controllers, lights, and sensors.
Final assembly involves mounting the scissor arm assembly onto the chassis assembly, routing cables, installing the tires, connecting the hydraulic hoses, mounting the platform assembly to the scissor arm assembly, installing additional wiring, and making electrical connections.
The scissor lift is then inspected and tested, a multi-step process that involves adjusting and calibrating sensors, lubricating tracks and pads, testing the battery and charger, adjusting the hydraulic pressure, and calibrating the lifting and lowering speed.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362605).