The tariff classification of Polyaxial Pedicle Screws, MIS Extended-Tab Pedicle Screws, and Locking Set Screws from Taiwan
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Ruling text
In your letter dated June 26, 2026, you requested a tariff classification ruling. The products under consideration are CapLOX II® Polyaxial Pedicle Screws, TowerLOX® Polyaxial Pedicle Screws, MIS Extended-Tab Pedicle Screws (TowerLOX-EXT®), CapLOX II® Locking Set Screws, and TowerLOX® Locking Set Screws.
These screws are components of the CapLOX II® Pedicle Screw System or the TowerLOX® MIS Pedicle Screw System, which are titanium alloy spinal fixation systems consisting of screws, set screws, rods, and cross connectors for use in the thoracic, lumbar, and sacral spine. The CapLOX II® Pedicle Screw System is configured exclusively for traditional open posterior surgical approaches, while the TowerLOX® MIS Pedicle Screw System is specifically optimized for minimally invasive surgery (MIS) or “mini-open” techniques.
These systems are intended to provide immobilization and stabilization of spinal segments in skeletally mature patients as an adjunct to fusion in the treatment of acute and chronic instabilities or deformities of the thoracic, lumbar, and sacral spine, including degenerative spondylolisthesis with objective evidence of neurologic impairment, fracture, dislocation, scoliosis, kyphosis, spinal tumor, pseudoarthrosis, and failed previous fusion.
The Polyaxial Pedicle Screw is described as a multi-component bone-anchoring implant consisting of a continuous, dual-lead threaded bone shaft and a multi-directional (polyaxial) open housing head (tulip). It is manufactured from high-strength titanium alloy (Ti-6Al-4V ELI per ASTM F136).
The polyaxial mechanism allows the housing head to articulate up to 63° relative to the longitudinal axis of the bone screw, minimizing the need for aggressive, complex manual contouring of the longitudinal support rod during multi-segment constructs. The screw is designed to be rigidly anchored into the vertebral bodies of the thoracolumbosacral spine to provide stability and facilitate multisegmental spinal fusion.
It is permanently implanted during spinal surgery, remains in the body long-term, and is used in conjunction with interconnecting rods and locking set screws. Each MIS Extended-Tab Pedicle Screw shares the exact same internal structural dimensions, dual-lead bone threads, and polyaxial head interface as the standard Polyaxial Pedicle Screw. However, it features two parallel, rigid metallic extension walls (extended tabs) projecting proximally from the upper edges of the tulip head.
These tabs extend up through the patient's skin layer during MIS procedures to direct rod insertion and are snapped off cleanly at a pre-machined internal score line once assembly is complete. The screw portion is permanently implanted during spinal surgery and remains in the body long-term, after which the delivery tabs are detached. It is used in conjunction with interconnecting rods and locking set screws.
The Locking Set Screw is described as a low-profile, threaded cylindrical blocking plug featuring a specialized internal drive interface (e.g., T25 Torx) and an engineered buttress/truncated thread profile. The locking set screw is driven vertically down into the internal threads of the pedicle screw tulip head.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362665).