The classification of nonalloy steel posts from India
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the sigma shaped, nonalloy steel zinc coated posts will be 7216.91.0010, HTSUS, which provides for Angles, shapes and sections of iron or nonalloy steel: Angles, shapes and sections, not further worked than cold-formed or cold-finished: Other: Cold-formed or cold-finished from flat-rolled products: Drilled, notched, punched or cambered.
Ruling text
In your letter dated July 1, 2026, you requested a tariff classification ruling on behalf of your client, Ideematec. The products under consideration are sigma shaped, nonalloy steel zinc coated posts/profiles with holes drilled along their length. These cold-rolled steel posts will measure from 150 - 180 mm in height, 80 - 100 mm in width, and 4.1 - 5.3 meters in length. The steel posts will be used in utility-scale solar farms.
In your submission, you propose that the steel posts may be classified in subheading 8479.90.95, Harmonized Tariff Schedule of the United States (HTSUS), covering other parts of machines of heading 8479, HTSUS. We disagree. While complete solar tracker systems generally fall within heading 8479, the separately imported steel posts are more specifically provided for elsewhere in the tariff schedule. See, e.g., NY Ruling Letter N308324, dated January 9, 2020.
Accordingly, classification in heading 8479 is inappropriate.
In the alternative, you suggest that the steel posts are properly classified under subheading 7308.90.6000, HTSUS, which provides for Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel: Other: Columns, pillars, posts, beams, girders and similar structural units: Other.
We disagree. Based on the information provided, the subject posts are specifically provided for elsewhere in the tariff and therefore precluded from classification in heading 7308, HTSUS. We turn to the Explanatory Notes (ENs) of the HTSUS for clarification as to the proper classification of the merchandise concerned. When interpreting and implementing the HTSUS, the ENs of the Harmonized Commodity Description and Coding System may be utilized.
The ENs, while neither legally binding nor dispositive, provide a guiding commentary on the scope of each heading, and are generally indicative of the proper interpretation of the HTSUS. CBP believes the ENs should always be consulted. See T.D. 89-80, 54 Fed. Reg. 35127, 35128 (August 23, 1989). EN 72.16 provides, in pertinent part: Angles, shapes and sections are defined in Note 1(n) to this Chapter.
The heading includes goods which have been cold-formed or cold-finished (by cold-drawing, etc.) and also covers angles, shapes and sections made by forming on a roll type machine or by forming sheets, plates or strip on a press.
The products of this heading may have been subjected to working such as drilling, punching or twisting or to surface treatment such as coating, plating or cladding - see Part IV (C) of the General Explanatory Note to this Chapter, provided they do not thereby assume the character of articles or of products falling in other headings. The steel posts under consideration are shaped into an angle, shape, or section conforming to heading 7216.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362807).