The country of origin of gate and butterfly valves
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Consequently, as the country of origin of the valve bodies for both valve types is Thailand, the country of origin of the butterfly and gate valves will be Thailand.
Ruling text
In your letter dated July 3, 2026, you requested a country of origin ruling on behalf of your client, Galaxy Industrial (Thailand) Co., Ltd. The products under consideration are gate valves (ranging from DN50/2" to DN600/24") and butterfly valves (ranging from DN50/2" to DN800/32"). Each butterfly valve consists of a cast iron body, a seat, a valve disc, and a handle for manual actuation.
Each gate valve features a cast iron body with flanged ends for pipeline connection, a handwheel for manual actuation, a resilient-seated closure, and a stem. While the valves vary in size, they are all designed to control the flow of fluid. With respect to origin, the final assembly of both types of valves occurs in Thailand using components from China and a valve body from Thailand.
Prior to the final assembly, the valve body and other components undergo precision machining to achieve exact dimensions and tolerances. Machining operations include drilling, boring, turning, and milling to ensure a proper fit of the all the components. Afterwards, the valve body is subjected to a surface treatment and a coating process. The final assembly begins by positioning a valve bushing, a rubber seat, a disc and a stem in a valve body in sequence.
Additional boring operations are completed to refine the internal dimensions and tolerances necessary to achieve a proper fit of the components. Afterwards, the inserted components are mechanically pressed in place. Once complete, pins are inserted into the assembly to retain the components in their operational positions. Lastly, an actuator is connected and screwed onto the valve. Inspections and testing are completed throughout the assembly process.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362852).