The tariff classification of deadend connectors from Mexico
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for all four models of deadend connectors will be 8535.90.8040, HTSUS, which provides for “Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits…for a voltage exceeding 1,000 V: Other: Other: Other connectors.” The general rate of duty will be 2.7 percent ad valorem.
Ruling text
In your letter dated July 6, 2026, you requested a tariff classification ruling you requested a tariff classification ruling on behalf of your client, Hubbell Power Systems, Inc. There are four items under consideration with this request, which are all identified as deadend connectors for use in high voltage overhead power transmission or distribution systems and are individually identified as (Item 1) Aluminum Bolted Deadend with Stirrup Clamp (Model No. ADES70N) (“the Stirrup Model”); (Item 2) Straight Line, Spring-Loaded, Side-Opening Aluminum Bolted Deadend (Model No. ADEZ116N) (“the Spring-Loaded Model”); (Item 3) Straight Line, Strain Clamp Aluminum Bolted Deadend (Model No. ADS88N) (“the Aluminum Model”); and (Item 4) Aluminum Quadrant Strain Clamp Bolted Deadend (Model No. SD185N) (“the Quadrant Model”).
Item 1, the Stirrup Model, is used with distribution conductors made of aluminum, steel reinforced aluminum, or aluminum alloy. It includes two U-bolts which are used to secure conductors in place to make an electrical connection. The body and keeper are made of aluminum alloy, and the stirrup is made of copper.
Electricity flows from the conductor through the deadend connector to the stirrup, where a hot line clamp can be attached to a downstream electrical apparatus (e.g., switch, capacitor bank, protection device). Item 2, the Spring-Loaded Model, is used with distribution and light transmission conductors made of aluminum, steel reinforced aluminum, or aluminum alloy. It includes a side opening with a spring-loaded keeper and two U-bolts used to secure conductors in place to make an electrical connection.
The body and keeper are made of aluminum alloy, allowing for the safe and efficient flow of electricity. Electricity flows from the conductor through the deadend connector to allow for a connection to be made to other parts of the grid (e.g., insulators, fuse disconnect switches, lightning arrestors, or distribution transformers) using a clamp or similar connector. Item 3, the Aluminum Model, is used with distribution and light transmission conductors made of aluminum.
It includes two U-bolts which are used to secure conductors in place to make an electrical connection. This model is manufactured using nonferrous conductive aluminum alloy. Electricity flows from the conductor through the deadend connector to allow for a connection to be made to other parts of the grid (e.g., insulators, fuse disconnect switches, lightning arrestors, or distribution transformers) using a clamp or similar connector. Item 4, the Quadrant Model, is used with transmission conductors made of aluminum.
It includes five U-bolts to secure the conductors in place to complete the electrical connection. The body and keeper are made of aluminum alloy. Electricity flows from the conductor through the deadend connector to allow for a connection to be made to other parts of the grid (e.g., insulators, fuse disconnect switches, lightning arrestors, or distribution transformers) using a clamp or similar connector.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362881).