The tariff classification of PET/Aluminum composite film from Germany
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the PET/Aluminum composite film will be 7607.20.5000, HTSUS, which provides for aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: backed: other.
Ruling text
In your letter dated July 7, 2026, you requested a tariff classification ruling. The samples which you provided will be retained by this office. The product under consideration is described as a PET/Aluminum composite film consisting of a 12-micron (0.012 mm) thick layer of PET film, a 6.35-micron (0.00635 mm) thick layer of aluminum foil, and a 2-micron (0.002 mm) thick 2K-PU adhesive which bonds the PET film and foil together. The panels are used in the production of electronic devices as a passive component.
You suggest classification of the PET/Aluminum composite film in 3921.90.4090, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other plates, sheets, film, foil and strip, of plastics: other: flexible: other. We disagree. The product is comprised of a single layer of aluminum sheet dry laminated to a polyethylene terephthalate (PET) film with adhesive.
To be classified in Chapter 39, products comprised of plastic and other materials must retain the essential character of articles of plastic. While the PET film is the thicker layer, the PET and aluminum are of virtually the same weight. The aluminum sheet is not embedded within the PET, nor does it separate two layers of plastic.
Further, you indicate that the finished product will be used in the production of electronic devices, and the aluminum layer is required as an electrically conductive component (electrode material). It is the opinion of this office that the finished product does not retain the essential character of plastic and is therefore excluded from classification in 3921.90.4090, HTSUS.
The applicable subheading for the PET/Aluminum composite film will be 7607.20.5000, HTSUS, which provides for aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: backed: other. The general rate of duty will be free. The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change.
The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other duties as provided for in Subchapter III to Chapter 99, HTSUS.
Thus, for example, in addition to the classification stated above, the merchandise covered by this ruling may also need to be reported with either the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions covering exceptions to such tariffs.
For further information to assist with the importation process, please refer to the frequently updated Cargo Systems Messaging Service (CSMS) messages at https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and the Trade Remedies page at https://www.cbp.gov/trade/programs-administration/trade-remedies.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N362921).