The country of origin of three oven lamps
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, we find that the country of origin for the three oven lamps will be China in both scenarios for the purposes of current trade remedies.
Ruling text
In your letter dated July 13, 2026, you requested a country of origin ruling on three oven lamps for the purposes of current trade remedies. The merchandise under consideration is referred to as Item 1 Wall Oven Lamp (191D7209), Item 2 Wall Oven Lamp (191D7477) and Item 3 Apex Lamp (301D1481). The Bill of Materials and the component pictures indicate that the Wall Oven Lamps in Item 1 and Item 2 appear to be highly similar in construction except for the shape of the light head (housing).
Each of these oven lamps consists of a glass lens, a metal housing containing a socket, a light bulb and electrical wires with plug or connector at either end. Additionally, Item 2 also has a metal clip. The Apex Lamp (Item 3) consists of a dome-shaped glass lens, metal case (housing), metal pin, light bulb and a socket with two pins for connection to a power supply. The procedures for the making of components are illustrated as follows: Glass Lens Melting sand and molding the liquid to form a glass lens.
Metal Case, Metal Clip and Metal Pin Cutting the stainless steel sheet and making the metal case using a progressive stamping mold. Ceramic Lamp Socket and Plug Pouring a ceramic powder slurry/sand into the mold and then firing it in a kiln to fuse the particles together. After firing, the ceramic component is then assembled with the metal terminals. Bulb Forming a coil of metal to make the wire, melting the sand to make a glass tube, and mounting the metal filament inside a glass bulb.
Finally, attaching the connectors to the bulb for electrical connection. Harness Clamping the terminals to the electrical wires to make the harness. The terminals and the wires are made in China via operations of metal drawing, plastic extrusion, etc. Connector and Retainer Melting the plastic pellet and making the plastic parts via plastic injection molding operations.
The factory in Thailand will assemble the Thai-origin components and components imported from China (of Chinese-origin) to produce the finished lights. Specifically, you present two different manufacturing process scenarios as follows: Scenario 1 The assembly process for the lamps in Thailand is summarized as follows: Item 1 - The metal case, and harness are made in Thailand, and the glass lens, halogen bulb, ceramic, connector, and retainer are imported from China.
In Thailand, the metal case is made from stainless steel sheet by progressive stamping mold; and the harness is made by clamping the terminals to the wires from the imported electric wires and terminals. Item 2 - The metal case and metal clip are made in Thailand, and the glass lens, halogen bulb, ceramic, connector, and retainer are imported from China.
In Thailand, metal case and metal clip are made from stainless steel sheet by progressive stamping mold; and the harness is made by clamping the terminals to the wires from the imported electric wires and terminals. Item 3 - The metal case and metal pin are made in Thailand, and the glass lens, halogen bulb, and ceramic socket are imported from China.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N363264).