The country of origin of an indoor unit
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Ruling text
In your letter dated July 22, 2026, you requested a country of origin ruling on behalf of your client, HTNS Customs Corporation. Part number BAQE03MRACAD is identified as an indoor Air Handling Unit (AHU) that is designed to control temperature and humidity levels of indoor spaces. When set to the cooling mode, indoor air passes through an evaporator, allowing refrigerant to absorb heat and cool air to be supplied back into the room.
At the same time, moisture in the air condenses on the surface of the evaporator and is drained away. When set to the heating mode, indoor air passes through the evaporator and refrigerant releases heat to the air into the room. Regarding country of origin, the unit is manufactured in China as a semi-finished product, and exported to South Korea, where a component referred to as a duct and sub-panel assembly and other components are incorporated into the structure of this product.
The semi-finished product is comprised of Chinese components (exterior covers and panels, a bar support, a bracket fixing drain, a packing support plate, bracket piping with insulation, and an evaporator subassembly). The duct and sub-panel assembly is assembled in South Korea using components from China and Korea (a motorized blower and a control device). The additional production that occurs in South Korea begins by removing screws to remove the exterior covers of the unit.
Afterwards, a duct and sub-panel assembly is installed within the structure of semi-finished product and screwed in position. The production process continues by joining a leak sensor from South Korea and leak assembly using screws. Once the wire connections and system configuration are completed, the exterior panels are re-installed using screws. The finished AHU is labeled and packaged ready for shipping. Various tests and inspections are completed during the assembly process.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). In this instance, the production processes that occur in South Korea are not complex. The components are simply inserted into the semi-finished product and screwed in place.
The components do not lose their individual identities to become an integral part of a new article, possessing a new name, character and use. Instead, this office believes the origin of the indoor unit should be determined by its dominant component, which is the component that contributes to the cycles of changing temperature and humidity levels, i.e., a semi-finished product incorporating a Chinese evaporator.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N363516).