The country of origin of throttle bodies
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Ruling text
In your letter dated July 29, 2026, you requested a country of origin ruling on throttle bodies. The products at issue are throttle bodies, specifically item numbers E57C and E87-1. These components are part of a motor vehicle’s engine air-intake system. They are designed to execute commands received from the engine’s Electronic Control Unit (ECU) by opening and closing the throttle plate to control the volume of air intake.
Concurrently, they provide output signals that allow the control system to monitor the working status of the throttle body. Both throttle bodies are assemblies primarily comprised of a valve body, a cover, an actuating motor, a position sensor, and a transition gear on a gear shaft. With respect to origin, the throttle body is assembled in Thailand using a valve body from Thailand, a software chip from Germany and other components primarily sourced from China.
The final assembly begins by manually installing a shaft seal onto the valve body. Next, one to two bearings and a transition gear shaft are press-fit into position, followed by the installation of a torsion spring. The throttle shaft assembly is then loaded, twisted, and pressed into position. Subsequently, a shaft collar is punched onto the base of the valve body. The throttle plate, socket assembly, motor assembly, German-manufactured chip, and Chinese-manufactured sensor assembly are then installed in sequence.
The process finishes with the tightening of screws, the soldering of motor terminals, and final programming. For item number E57C, additional steps occur. Such steps include the manual application of lubricating oil on the seal ring, followed by the installation of a side cover and a crimp plug. Testing and inspections are conducted throughout the assembly process.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). In this instance, components such as the motor assembly, the throttle plate, and the gearing are press-fit or manually inserted into the valve body.
This process is relatively simple and does not transform the Chinese components into new and different articles of commerce with a name, character, and use distinct from those possessed prior to assembly. Because these processes do not result in a substantial transformation, we rely on the origin of the valve body to determine the origin of the subject throttle bodies. The valve body is bulky, accounts for a significant portion of the unit, and is fundamental to the air-regulating process.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N363816).