The country of origin of a battery charger for vehicle batteries
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Ruling text
In your letter dated August 12, 2026, you requested a country of origin ruling on behalf of your client, CTEK Inc. The merchandise under consideration is described as a battery charger, model number NXT 2.3 Powersport, which is designed to charge and maintain all types of lead-acid 12-volt batteries, as well as lithium batteries, that are found in conventional vehicles.
The battery charger is comprised of a Printed Circuit Board Assembly (PCBA) enclosed in an outer housing with LED indicators and an ON/OFF button with power cables affixed to either end. The unit is fully automatic which features a built-in automatic temperature sensor and a combination of advanced charging modes allowing it to charge in all weather conditions.
The battery charger also has a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging, and the charging of demanding AGM batteries.
In your submission, you state that the manufacturing process begins in Malaysia by populating a bare Printed Circuit Board (PCB) via Surface Mount Technology (SMT) with various electronic components, mainly of Chinese origin, such as resistors, capacitors, transformers, diodes, fuses, and integrated circuits, among other components to fully assemble the PCBA. The completed PCBA is then tested and inspected prior to being exported to China.
In China, electrical cables are routed through the upper enclosure and soldered to the PCBA. Once the PCBA is seated within the upper enclosure, the lower housing is welded to the upper assembly to seal the battery charger unit. The finished battery charge is then tested and packaged for shipment into the United States. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable.
See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence.
See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N364239).