The country of origin of an automotive carrier
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Ruling text
In your letter dated August 20, 2026, you requested a country of origin ruling on automotive carrier on behalf of Seohan Innobility Co., Ltd. The article under consideration is identified as the TM PE Carrier LH, part number M52715-S1AA0, which is designed for use in the rear suspension system of the TM PE vehicle model.
The carrier provides mounting points for various suspension, steering, braking, and wheel-speed detection components, including the lower arm, upper arm, assist arm, trailing arm, constant velocity joint, wheel speed sensor, and brake caliper. The carrier also supports the rear wheel load of the vehicle. According to the information provided, the TM PE Carrier LG is manufactured in South Korea from aluminum ingot, aluminum scrap, strontium, and magnesium of Chinese origin.
In South Korea, the aluminum ingot and scrap are melted and combined with the strontium and magnesium additives. The molten aluminum undergoes modification and degassing treatments before being subjected to an electromagnetic-stirring high-pressure casting process. During the casting operation, the prepared aluminum is formed into the specifically shaped TM PE Carrier LH. The casting is subsequently cooled, trimmed to remove the gates and excess material, and heat treated.
The completed carrier then undergoes visual and X-ray inspections before being packaged for shipment. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). In the instant case, the materials imported into South Korea consist of Chinese-origin aluminum ingot, aluminum scrap, and alloying additives.
At the time of their importation into South Korea, these materials do not possess the name, shape, character, or dedicated use of an automotive carrier. In South Korea, the materials are melted, combined, treated, and subjected to an electromagnetic-stirring high-pressure casting operation that forms the aluminum into the specifically shaped TM PE Carrier LH, part number M52715-S1AA0.
Through these operations, the raw materials acquire the physical configuration and predetermined use of a dedicated rear suspension component. This conclusion is also consistent with NY N301439, dated November 21, 2018, in which foreign-origin aluminum materials were melted and processed in South Korea to produce aluminum billets. CBP determined that the processing performed in South Korea substantially transformed the foreign-origin materials and that the resulting billets were products of South Korea.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N364411).