The country of origin and marking of an automatic wristwatch from Japan
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Ruling text
In your letter dated August 21, 2026, you requested a country of origin and marking ruling on an automatic wristwatch from Japan. Styles 1903WC001-1 (black dial) and 1903WC001-2 (blue dial) are automatic wristwatches. The watches feature Miyota 9039 movements containing 24 jewels, stainless-steel cases, and leather straps. You state that the watch movements are manufactured in Japan, while the cases and straps are manufactured in China. All components are assembled into complete watches in China.
According to HQ 306338, dated May 14, 2021, “CBP’s long-standing position has been that the origin of a watch (excluding the strap, band or bracelet) is the country of assembly of the watch movement. Although the addition of the hands, dial, case or watchband may add definition to the timepiece, it does not substantially change the character or use of the watch movement, which is the essence of the watch.” In this case, the movements of styles 1903WC001-1 and 1903WC001-2 are manufactured in Japan.
Consequently, the country of origin for the finished watches is Japan. In order to satisfy the requirements of 19 U.S.C 1304, a watch must be legibly and conspicuously marked with the name of the country of manufacture of the watch movement.
Section 134.43(b), Customs Regulations (19 CFR 134.43(b)), in conjunction with section 11.9, Customs Regulations (19 CFR 11.9), provides that watches must be marked in accordance with the special marking requirements set forth in Chapter 91, Additional U.S. Note 4 of the Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202).
This note requires that any watch movement, or case provided for in the subpart, whether imported separately or attached to any article provided for in the subpart, shall not be permitted to be entered unless conspicuously and indelibly marked by cutting, die-sinking, engraving, stamping, or mold-marking (either indented or raised), as specified in the provisions of this note. This marking is mandatory. Customs has no authority for granting exceptions to the special marking requirements for watches.
Section (a) of Additional U.S. Note 4 requires that watch movements shall be marked on one or more of the bridges or top plates to show the country of manufacture and the name of the manufacturer or purchaser; and, in words, the number of jewels, if any servicing a mechanical purpose as frictional bearings.
Section (c) of Additional U.S. Note 4 requires that watch cases shall be marked on the inside or outside of the back cover to show the name of the country of manufacture, and the name of the manufacturer or purchaser. The country of manufacture in these requirements refers to where the movements and cases are manufactured rather than where the watch was made.
The special marking must be accomplished by one of the methods specified in the Additional U.S. Note 4, and using stickers is not an acceptable alternative Your proposal to mark the watch case with the words “JAPAN MVMT” satisfies the marking requirements of 19 U.S.C. 1304, provided it is legibly, indelibly, and permanently marked in a manner visible to the ultimate purchaser in the U.S.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N364461).