The country of origin of a steering knuckle
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Ruling text
In your letter dated September 2, 2026, you requested a country of origin ruling on a steering knuckle. The article under consideration is an automotive steering knuckle, identified as model number 10801126JT. The steering knuckle is a structural component of a vehicle's steering and suspension systems, serving as a load-bearing link between the wheel assembly and the chassis. It facilitates wheel support, positioning, and steering.
It also withstands the steering forces, braking forces, lateral forces, and road-induced impact loads generated during vehicle operation. The steering knuckle consists of a steering knuckle body manufactured in Thailand and three bushings manufactured in China. In Thailand, the steering knuckle body undergoes multiple manufacturing and finishing operations, including shot blasting, grinding, electrophoretic coating, and precision machining.
The machining operations include matching the bearing mounting bore, precision machining of key mounting and functional surfaces, and machining the mounting holes for the dust shield. These operations establish the dimensions and functional surfaces necessary for the steering knuckle body to perform its intended function. Following the machining operations, the three Chinese-origin bushings are positioned at designated mounting locations and press-fit into the steering knuckle body using a hydraulic press.
The completed assembly is then inspected and packaged for shipment. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Based on the information provided, the steering knuckle body manufactured and machined in Thailand imparts the character and primary function of the finished steering knuckle.
The incorporation of the Chinese-origin bushings does not substantially transform the Thai-origin steering knuckle body into a new and different article of commerce with a different name, character, or use. Rather, the bushings are incorporated into an already identifiable steering knuckle body whose essential structural and functional characteristics have been established through the manufacturing and machining operations performed in Thailand.
Accordingly, we find that the country of origin of the subject steering knuckle, model 10801126JT, is Thailand. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N364787).