The country of origin of helical coil springs
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Ruling text
In your letter dated September 23, 2026, you requested a country of origin ruling on helical coil springs on behalf of your client, Silgan Dispensing Systems Corporation. Informational material was submitted with your request. The products under consideration are helical coil springs. The springs are made from steel wire supplied by various vendors located in China, the European Union, India, South Korea, and Vietnam.
Upon importation, the wire is shipped to a manufacturing facility in the United States where the wire is converted into springs. At this facility, the imported wire is fed through a machine which winds the wire around a mandrel forming springs and then cuts them at their required length. The newly cut springs are then sent to an oven to undergo heat treatment, improving durability and reducing internal strain from the coiling process.
The springs are then rinsed and cleaned through a series of chemical and hot water baths. Lastly, the springs are allowed to cool and dry resulting in the final product, to be packed and shipped.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlaender & Co., 27 C.C.P.A. 297, 302 (1940).
Part 134 of the U.S. Customs and Border Protection (CBP) Regulations (19 CFR 134) implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304. Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines “country of origin” as the country of manufacture, production, or growth of any article of foreign origin entering the United States.
Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the “country of origin” within the meaning of the marking laws and regulations. A substantial transformation occurs when, as a result of manufacturing process, a new and different article emerges, having a distinct name, character or use, which is different from that originally possessed by the article or material before being subjected to the manufacturing process.
See United States v. Gibson-Thomsen Co., Inc., 27 C.C.P.A. 267 (C.A.D. 98) (1940). In this case, the steel wires used to make the springs are imported into the United States as reels or spools. During the manufacturing process, the steel wires are coiled around a mandrel and cut to specifications.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N365349).