The country of origin of an air pressure regulator
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, as the country of origin of the valve body is China, the country of origin of the air pressure regulator will be China.
Ruling text
In your letter dated October 1, 2026, you requested a country of origin ruling on an air pressure regulator. Item number 1111200197 is identified as a 1/4-IN Compressed Air Pressure Regulator. The regulator consists of a pressure gauge positioned in front of valve that is actuated using a knob assembly.
The valve consists of a die-cast aluminum valve body with 1/4" NPT female inlet and outlet ports that incorporate a diaphragm assembly, a brass valve spool, springs, an O-ring, an aluminum plug, a valve seat, screws and a bolt. Once connected to a compressed air system, the regulator functions as a valve that stabilizes incoming air pressure to an adjustable constant output pressure for downstream pneumatic tools and equipment.
With respect to origin, the final assembly of the regulator occurs in Malaysia using components from China and Malaysia. Prior to the final assembly, the valve body and plug are manufactured in China and exported to Malaysia to undergo a machining process to add threading. Less than three percent of material is removed during the machining process. The final assembly process begins by inserting a screw, a Chinese spring, and a Chinese diaphragm assembly onto a Chinese knob assembly.
Afterwards, a valve body is screwed onto the knob assembly. Subsequently, a spool, a spring, an O-ring and plug are manually inserted into the valve body. A Chinese pressure gauge is then screwed onto the valve body. Once complete, the regulator is tested, inspected and packaged ready for shipment. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable.
See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence.
See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). When determining the country of origin of valves, CBP has relied on the origin of the valve body, the essential component of a valve, as the process of assembling a valve is rather simple. Components are typically assembled into the valve body using processes such as inserting and screwing components to each other. Such processes are not regarded as being complex.
See New York rulings N339513 (dated May 6, 2024), N338713 (dated April 3, 2024), N325765 (dated May 26, 2022) and N322652 (dated December 2, 2021). The same origin rationale is applicable here, as the assembly processes of the subject regulator, which functions as a valve, primarily consist of inserting components into a valve body. With regard to the origin of the valve body, it is visibly recognizable as a valve body once exported from China.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N365607).