The country of origin of an in-line MOS filter
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the in-line MOS filter (item number 1111200201) will be Malaysia.
Ruling text
In your letter dated October 1, 2026, you requested a country of origin ruling on an in-line MOS filter. Descriptive literature was provided for our review. The item under consideration is described as an in-line MOS filter (item number 1111200201), which is an in-line water separator and mini air filter designed to attach directly to air compressor hoses, spray guns, or airbrushes to eliminate harmful moisture, oil mist, and solid debris before they reach the tools.
The pneumatic accessory operates at 20 CFM at 90 PSI via a 1/4-inch NPT male inlet stem while safeguarding sensitive downstream equipment from internal contaminants. The device features a blue anodized aluminum end cap, a rubber O-ring, a Polypropylene (PP) inner sleeve, filter core, and end base, all enclosed within a transparent Polycarbonate (PC) bowl for instant visual monitoring of trapped contaminants, which is equipped with an integrated manual drain button for regular liquid discharge.
The in-line MOS filter is made from components sourced from China. The components include the aluminum used to make the blue end cap, the stainless steel used to make the threaded inlet stem, the O-ring, inner sleeve, filter core, end base and transparent filter bowl. All of the Chinese components are then sent to Malaysia where the compression blue end cap and threaded inlet stem are CNC machined, milled, drilled, grooved, deburred, and inspected.
Once the metal components are made, they are then assembled with the remaining Chinese components to form the complete in-line MOS filter. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N365609).