The country of origin of leather from Brazil
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 5, 2026, you requested a country of origin ruling for leather hides on behalf of RMG Leather USA LLC DBA Carroll Leather. The manufacturing process and a sample was provided for review. The bovine leather hides identified as “Item 2100115726” will be imported as whole hides that are approximately 45 to 55 square feet each.
The hides are sourced from Brazil and processed from raw hide to wet-blue state (classifiable in heading 4104 when imported in the wet state) and shipped and exported to Italy to undergo further processing as listed below.
The finished article will be used as upholstery leather in the manufacture of furniture (classifiable in heading 4107). 1) Processes done in Brazil, from raw hide to wetblue state: a) Curing Fresh hides are salted or refrigerated to prevent rotting of the hides b) Soaking Raw hides are placed in water to rehydrate the leather and rinse off any salt or dirt from the hides. c) Liming/Dehairing— Hides are put in drums with lime (calcium oxide) and sodium sulfide.
This raises the PH level which swells the collagen and dissolves the hair roots so the hair can be removed through the force of the drum turning. d) Fleshing—The hides go through a machine that removes leftover fat, meat and tissue from the flesh side of the hide. e) Deliming/Bating— Hides are rinsed to lower the PH and remove any lime residue.
Enzymes are added to the process in soften the hide. f) Pickling— The hides are put in a drum with salt and acid to prepare the hide so it can be tanned. g) Chrome Tanning— The hides are put in a drum with Chromium sulfate salts. The Chromium links with the fibers and stabilizes the leather so it will not rot.
The reaction of the hide to the Chromium salts turns the leather a light blue which is now considered a wet blue. h) Measuring— Hides are either measured by square feet or weighed. i) Packaging— The hides are folded and loaded onto skids which are wrapped in plastic before being loaded on a container for shipping to Italy 2) Processes done in Italy, from wetblue state to finished upholstery leather: a) Splitting— The leather arrives in full substance(thickness) so the tannery runs the hides through a machine and cuts it into two separate pieces.
The piece with the grain is the top grain which we use. The bottom piece is a split which can be produced into leather for other intended purposes. b) Shaving— The leather is run through a machine which creates a uniform thickness on the flesh side of the hide. c) Neutralization — The hides are washed in drums with chemicals to raise the PH level from the acidic wet blue State. d) Retanning— Soaking the hides in drums with tanning agents.
Helps determine the softness, grain structure and body of the leather. e) Dyeing- The hides are put in rotating drums with water based dyes for hide color penetration. f) Fatliquoring— Oils and waxes are added to the drum to ensure that the hide fibers are soft and pliable after drying. g) Setting Out— Process to remove excess water from the hides. h) Conditioning- The tannery adds a controlled uniform amount of moisture back into the hide.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N365756).