The tariff classification of components of a solid-fuel incineration facility from France or Turkey
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 5, 2026, you requested a tariff classification ruling on behalf of your client, Kanadevia Inova USA LLC. The five items under consideration are components of a grate combustion system designed to generate heat for electricity production using municipal solid waste and refuse-derived fuel.
While the combustion system itself is not at issue, it includes a waste delivery and storage section, a combustion and boiler section, a flue gas treatment section, an energy recovery section, and a residue handling and treatment section. The subject components are used in the combustion and boiler section. The first item is referred to as a ram feeder and is described as a ram, driven by hydraulic pistons, mounted in a frame with a sloping rear wall.
It is a component of a mechanical stoker system and is used to push waste from a horizontal feed table onto an incineration grate. The second item is referred to as a grate bar and is a steel casting with a bent profile, consisting of a horizontal top section and a vertical front face. The bar is available in two configurations. The first features small, evenly spaced circular holes on the front face, whereas the second features raised circular ports or nozzles on the top surface near the front edge.
The grate bars are mounted on a retaining tube to form a grate element. Alternating rows of movable and stationary grate elements make up a grate module, and multiple grate modules form a mechanical grate system that advances waste through the combustion chamber. The third item is referred to as a grate carriage and is a rigid, beam-like structure made of steel. It is a component of a mechanical grate system that connects the previously described grate bars via longitudinal links.
The carriage travels forward and reverse on roller bearings along the frame, and its movement is powered by a hydraulic cylinder. The fourth item is referred to as a bottom ash chute and is described as a component of an ash discharge system that is mounted atop a bottom ash extractor. It has a downward-slanting design and is positioned below the ram feeder and grate elements. Riddling and ash are periodically conveyed to the chute, which funnels the ash into the bottom ash extractor.
The fifth item is referred to as a bottom ash extractor and is described as a system used to discharge and cool residual ash and riddling. It is a self-contained unit comprising a heavy-duty steel housing, an upper inlet opening for receiving ash, an inclined trough lined with wear plates, and a lower outlet opening for material discharge. Available as either a dry or wet system, both systems are further categorized into ram-type and apron-type configurations.
Ram-type systems discharge ash from an enclosed extraction chamber (for dry systems) or a water-filled hopper (for wet systems) using a hydraulically driven ram. Apron-type systems continuously discharge ash onto a fully encapsulated, air-cooled steel apron conveyor (for dry systems) or into a water-filled quench bath (for wet systems).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N365781).