The country of origin of metal-oxide-semiconductor field-effect transistors
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, the country of origin of the finished MOSFET will be South Korea.
Ruling text
In your letter dated October 6, 2026, you requested a country of origin ruling on metal-oxide-semiconductor field-effect transistors (MOSFET). The merchandise under consideration is identified as a Dual N-Channel Trench MOSFET, Part number AMDUA040N070RH, which is a transistor used in the inverters for electric vehicles and hybrid vehicles. In your submission, you state that the front-end manufacturing process takes place in South Korea which includes the following processes.
Coating Exposure Develop Dry Etch Wet Etch Photoresist Strip Oxidation / Diffusion LPCVD Ion Implant Chemical Vapor Deposition Physical Vapor Deposition Wafer Backside Process Probe Test You state that the front-end processing forms the structure and establishes the electrical characteristics including the switching functionality of the MOSFET. All wafer fabrication processes are performed in South Korea to form the entire electrical circuit that defines the function of the MOSFET.
The back-end manufacturing process that takes place in China includes: Wafer Saw Die Attach Wire Bond Mold Laser Mark Package Singulation Packing and Shipping The back-end assembly process in China is limited to cutting the fabricated wafer into individual dies and packaging them using several steps, including die attach, wire bonding, molding or encapsulation, marking, and final inspection.
You state that the back-end process does not redesign the semiconductor structure or alter the core electrical switching function which was already established through the front-end fabrication. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N365797).