The tariff classification of a semiconductor wafer coating and cleaning module from Vietnam
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 20, 2026, you requested a tariff classification ruling. The product in question is the Thinkcoater Coat and Clean Module, part number TCM2100. The Coat and Clean module is machine or tool that applies a temporary protective coating to processed semiconductor wafers containing integrated circuits and subsequently removes that coating and debris generated during laser scribing. It operates in the back-end wafer-processing sequence, before the wafers are separated into individual dies.
The Coat and Clean module does not itself perform laser scribing or etching. You state that the module was designed for integration with Nanoverse’s NVT-6600 semiconductor laser-scribing system, and may also be integrated into Nanoverse’s NVT-7700, which combines laser-scribing with an integrated metrology system. During operation, a wafer is loaded into the host system’s Equipment Front-End Module (EFEM) and transferred to the Coat and Clean module.
The tool performs a spray coat which uses coordination motion between the spinning wafer and spray coat nozzle to lay down an even layer of protective coat material as the nozzle travels above the wafer surface. The coating protects the integrated circuits and captures debris during the subsequent laser-scribing operation. The coated wafer is then transferred to a separate laser-scribing module. After scribing, the wafer is returned to the Coat and Clean module, where it again rotates at approximately 2,250 rpm.
A nozzle sprays deionized (DI) water onto the wafer to remove the temporary coating and scribing debris. The cleaned wafer is then returned to the EFEM for removal from the system.
The applicable subheading for the Thinkcoater Coat and Clean Module, part number TCM2100, will be 8486.20.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in Note 11(C) to this chapter; parts and accessories: Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits.”
The general rate of duty will be free. The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other charges, which may apply to the goods discussed herein.
This includes, but is not limited to, tariffs and other duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the classification stated above, the merchandise covered by this ruling may also need to be reported with either the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions covering exceptions to such tariffs.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N366238).