Recent U.S. Customs and Border Protection rulings from CROSS, searchable by HTS code, keyword, or ruling number.
In your letter dated February 24, 2026, you requested a tariff classification ruling. There are three items concerned, each used as a part of Lightspeed Zulu 3 aviation headset. The part names and model numbers are: 000000350.B Knob, Volume Slider 000000676.A Cover, Microphone Housing Pot 000000814.A1 Button, Bluetooth Control, Painted The Knob, Volume Slider (volume slider knob) is used on the control box assembly of the Zulu 3 headset. It is a part of the control box housing. In use this knob is mounted to the housing in a way that allows it to slide up and down.
In your letter dated February 24, 2026, you requested a tariff classification ruling. The item concerned is foam that is used in Lightspeed Zulu 3 aviation headsets. The foam is further identified as Banana, Left, SKU number 000000722.F. The foam is a shaped piece of flexible ethylene propylene diene monomer (EPDM) foam. It is designed to be installed into the ear cup of the Zulu 3 headset.
In your letter dated February 23, 2026, you requested a tariff classification ruling. The item under consideration are referred to as a Cup, Contoured, Left (Part number 303-00191-000.A4). This item is an ear cup assembly for Lightspeed’s Zulu H aviation headset. The left ear cup assembly is composed of a plastic blend of polycarbonate and acrylonitrile butadiene styrene resin, molded to a dome shape.
In your letter dated February 23, 2026, you requested a tariff classification ruling. The item concerned is a microphone windscreen, model # 000001524.A1. This article is made from polyether foam and measures approximately 25.4 mm × 12.7 mm × 12.7 mm. It is used on all Lightspeed headsets. In use, it would be installed over the microphone which is situated on the boom assembly, loosely adhered at the end of the boom. The windscreen serves several critical acoustic, mechanical, and environmental functions, such as: Wind/noise reduction.
In your letter dated February 23, 2026, you requested a tariff classification ruling. The items under consideration are referred to as Cup, Left (Part number: 303-00014-000.B2) and Cup, Right (Part number: 303-00017-000.B2). Both components are ear cup assemblies for Lightspeed’s Sierra aviation headset. The left and right ear cups are composed of a dome shaped plastic housing, which is a blend of polycarbonate and acrylonitrile butadiene styrene resin.
In your letter dated February 23, 2026, you requested a tariff classification ruling. The items under consideration are referred to as Sub-Assy, Cup, Left, Delta Zulu (Part number: 250-00061-000.A1) and Sub-Assy, Badge, Right, Delta Zulu (Part number: 250-00063-000.A1). The Sub-Assy, Cup, Left, Delta Zulu ear cup is a housing assembly for Lightspeed’s Delta Zulu aviation headset. The left ear cup sub assembly is composed of a dome-shaped inner magnesium housing.
In your letter dated February 23, 2026, you requested a tariff classification ruling. The items under consideration are referred to as Faceted Cup, Left (Part number 303-00035-000.A1) and Faceted Cup, Right, (Part number 303-00036-000.A1). Both components are faceted ear cups for Lightspeed’s Zulu 3 aviation headset. The left and right faceted cup assemblies are both composed of a dome shaped magnesium housing.
In your letter dated December 8, 2025, you requested a tariff classification ruling. The item concerned is referred to as a Color Chip, Blank, SKU # 303-00236-000.B1. It is used in the manufacture of Lightspeed’s Delta Zulu aviation headsets. The color chip is a custom designed/shaped item that becomes part of the control box housing. The color chip is primarily used as a reference standard for color consistency during manufacturing and assembly. It ensures that all headset components match the specified color for branding, uniformity, and professional appearance.
In your letter dated December 8, 2025, you requested a tariff classification ruling. The item concerned is referred to as a Cup Insulator, SKU # 304-00007-000.A1. This item is a cut to shape piece of Hypalon covered nylon. It is used inside the ear cups of Lightspeed’s Zulu 3 aviation headsets. Its overall dimensions are 60 mm in length by 60 mm in width. Its shape resembles a cross. The cup insulator helps control airflow and resonance inside the earcup. It creates a stable acoustic chamber, which minimizes unwanted sound reflections and improves low-frequency noise attenuation.
In your letter dated December 8, 2025, you requested a tariff classification ruling. The item concerned is a cover that is used in the production of aviation headsets, the applicable SKU number is 303-00248-000.A1. It will be installed on the ear cup assembly of aviation headsets to help secure the internal components. It provides structural protection, acoustic sealing, environmental shielding, and aesthetic and ergonomic attributes. It is constructed of PC-ABS, a high-performance thermoplastic blend of Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS).
In your letter dated November 27, 2025, you requested a tariff classification ruling. The items under consideration are referred to as Sub-Assy, Ear Cup, Left, Sierra (Part number: 260-00082-000.A1) and Sub-Assy, Ear Cup, Right, Sierra (Part number: 260-00083-000.A1). Both components are ear cup housing assemblies for a Lightspeed’s Sierra aviation headset. The left and right ear cup sub assemblies are composed of a dome-shaped inner plastic housing fitted with an aluminum outer shell.
In your letter dated November 27, 2025, you requested a tariff classification ruling. The item concerned is referred to as a battery door, USB cover, SKU # 303-00179-000.A1. This item is used in the manufacture of Lightspeed’s Tango aviation headsets. It is specifically used in the left earcup assembly. This USB cover (which forms a part of the battery door) helps protect the USB port on the headset from dust and debris. The primary purpose of this USB port cover is to prevent contaminants from entering the USB port, which could otherwise interfere with charging or data transfer.
In your letter dated November 27, 2025, you requested a tariff classification ruling. The item concerned is referred to as a transceiver assembly, SKU # 260-00036-001.A1 Assy, Transceiver, Tango, US. This module is a component of Lightspeed’s Tango brand aviation noise canceling headsets. This module allows for the wireless communication between the aviation headset and the aircraft’s audio panel (the intercom and auxiliary devices) via the Lightspeed Link network connection. Additionally, it also provides functions outside of the transmission of data.
In your letter dated November 27, 2025, you requested a tariff classification ruling. The items concerned are referred to as Headband Slider A, Painted (303-00120-000.A5) and Headband Slider B, Painted (303-00121-000.A4). The headband sliders (A & B) are used on the headband assembly of Lightspeed ’s Zulu 3 aviation headset. They connect the headband top to the ear cups of the Zulu 3 headset and allow adjustability for use among all head shapes and sizes. The slider allows pilots to adjust the headband length for a secure and personalized fit.
In your letter dated November 22, 2025, you requested a tariff classification ruling. The item concerned is referred to as the H Mod Fabric Cover Insert, 250-00045-000.A4. The H Mod Fabric Cover Insert is solely used with Lightspeed’s Zulu aviation helmet and is a component of the H Mod Cup Kit. This article would be adhered onto the speaker plate assembly of the the ear cup. Functions: Prevents dust, dirt, and small debris from entering the speaker driver, which could degrade audio quality or damage components.
In your letter dated November 26, 2025, you requested a tariff classification ruling. The merchandise under consideration is referred to as the Zulu 2 Partial Headband, part number 260-00033-000.A3, which is a headband assembly for Lightspeed’s Zulu 2 aviation headsets. The Partial Headband consists of a headband assembly made of stainless steel and plastic with sliders for adjusting the fit. External shells for “Left” and “Right” earcups are attached to the headband assembly.
In your letter dated November 16, 2025, you requested a tariff classification ruling. There are four parts which are the subject of this ruling: 303-00012-000.B1 Spring Enclosure, Outer 303-00015-000.B1 Faceplate, Left 303-00016-000.B1 Driver Cover 303-00024-000.B1 Cover, Acoustic Vent. Each of the above cited parts are components of Lightspeed’s Sierra Aviation Headset. The Spring Enclosure (303-00012-000.B1) would be affixed to and located on the inside of the headband assembly.
Source: rulings.cbp.gov (CROSS). This index holds New York rulings from the recent period and the Headquarters rulings they cite. It is not the full CROSS database of 222,467 rulings, and it does not hold every Headquarters ruling. New rulings usually appear here within a few days of CBP publishing them; a ruling published long after its number was assigned can take several weeks. Revoked, modified and proposed marks come from the weekly Customs Bulletin, where CBP publishes most such actions under 19 U.S.C. 1625(c), read here from the Nov 2024 issues onward, and from the subjects of indexed Headquarters rulings. A revocation is marked from the date it takes effect. The absence of a mark is not confirmation that a ruling is still in effect. A ruling letter is binding on CBP only for the particular transaction or issue it describes (19 CFR 177.9). Confirm the text and status on CROSS before relying on a ruling. Not legal advice.