The tariff classification of aluminum foil lidding stock from Germany
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the aluminum foil that will be imported in rolls is 7607.19.6000, HTSUS, which provides for aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: not backed: other: other: other.
- The rate of duty will be 3 percent ad valorem.
- The applicable subheading for the aluminum foil that will be imported as pre-cut is 7607.19.3000, HTSUS, which provides for aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: not backed: other: other: cut to shape, of a thickness not exceeding 0.15 mm.
Ruling text
In your letter dated December 23, 2024, you requested a tariff classification determination. The products under consideration are identified as Aluthene® 70 IIE 116/8 and Aluthene® 70IIE 116/9. Both products are multi-layered aluminum foil lidding stock used for packaging of contact lenses. According to your submission, Aluthene® 70 IIE 116/8 is comprised of three layers: 1) lacquer, 2) aluminum foil, and 3) polypropylene.
The thickness of the layers of lacquer, aluminum foil, and polypropylene is 0.001 mm, 0.07 mm, and 0.022 mm, respectively, for a total thickness of 0.092 mm. The Aluthene® 70 IIE 116/9 is comprised of six layers: 1) overlacquer, 2) color, 3) white ink, 4) prelacquer, 5) aluminum foil, and 6) polypropylene. The thickness of the six layers is 0.0015 mm, 0.001 mm, 0.001 mm, 0.0015 mm, 0.07 mm, and 0.0274 mm, respectively, for a total thickness of 0.101 mm. The two Aluthene® products are of similar construction.
Aluthene® 70 IIE 116/8 has a lacquer, in liquid form, applied to the foil, while Aluthene® 70 IIE 116/9 has overlacquer, color, white ink, and prelacquer, all in liquid form, applied to the foil. In both types of Aluthene®, a polypropylene layer is applied by a coextrusion process. Polypropylene resins, in granular form, are fed into an extruder. Heat and pressure melt the polypropylene granules, which is then applied to the foil.
The combined effect of pressure, cooling, and oxidation forms the appropriate adherence to the foil. CooperVision states that “[t]he PP is in melted form as it is applied to the foil. It is not in solid state until it cools from pressure and chill roll which happens as it hits the foil on a substrate.” You state that ruling N020982, dated January 10, 2008, addressed the same merchandise.
In that ruling, Aluthene® 70 IIE 116/9 was imported both as pre-cut and in rolls, while Aluthene® IIE 70 IIE 116/8 would be imported as pre-cut.
CBP determined that the Aluthene® that was imported in rolls would be classified in subheading 7607.19.6000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for aluminum foil (whether or not printed, or backed with paper, paperboard, plastics, or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm, not backed, other, other, other.
This ruling also determined that the foil being imported as pre-cut would be classified in subheading 7607.19.3000, HTSUS, which provides for aluminum foil (whether or not printed, or backed with paper, paperboard, plastics, or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm, not backed, other, other, cut to shape, of a thickness not exceeding 0.15 mm.
You have suggested classification in subheading 7607.20.5000, HTSUS, which provides for aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: backed: other. You cite HQ ruling H318471, dated August 30, 2023, as support for your suggested classification. Ruling H318471 examined foil lidding stock that is also comprised of multiple layers.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344826).