The tariff classification of a coolant nozzle from Taiwan
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the coolant nozzle, item number 20-5863, will be 7616.99.5190, HTSUS, which provides for Other articles of aluminum: Other?Other.
- The rate of duty will be 2.5 percent ad valorem.
Ruling text
In your letter dated March 7, 2025, you requested a tariff classification ruling. Product descriptions, a technical drawing, and photographs of the coolant nozzle were provided for our review. The product under consideration is identified as a coolant nozzle, item number 20-5863. You described the article as “a machined nozzle designed as a component of a computer numerically controlled (CNC) machine tool coolant system.
The nozzle is externally threaded on one side, and on the other side, the orifice from which the coolant is sprayed measures 0.166 inches in diameter. The body of the nozzle has a hex shape for tightly securing the nozzle to its fitting with the use of a wrench.” The coolant nozzle is machined from aluminum alloy. The coolant nozzle will be principally used in the United States as a component of Haas CNC machining centers.
You indicated that “When CNC machining centers are in use, the friction of the cutting tool generates heat, which can cause damage to the workpiece and the tool itself. One solution for this is flood coolant, in which a pump driven coolant system sprays a coolant mixture directly at the cutting tool during operation to cool and lubricate it.
The coolant also helps to disperse and dislodge chips from the workpiece…Multiple coolant nozzles will be attached to a coolant manifold using adjustable fittings so that the coolant can be manually positioned to spray directly onto tools of varying lengths. This coolant manifold is then assembled into the spindle head of the machine.” The entire coolant sub-system includes nozzles, fittings, filters, a manifold, and a pump, all of which are integrated throughout the machine tool and connected by tubes and hoses.
The coolant flow is controlled by the CNC control unit. In your letter, you propose that the coolant nozzle is classified in heading 8466, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand. We disagree.
Merchandise imported into the United States is classified under the HTSUS. Tariff classification is governed by the principles set forth in the General Rules of Interpretation (“GRIs”) and, in the absence of special language or context which requires otherwise, by the Additional U.S. Rules of Interpretation. The GRIs and the Additional U.S. Rules of Interpretation are part of the HTSUS and are to be considered statutory provisions of law for all classification purposes.
GRI 1 requires that classification be determined first according to the terms of the headings of the tariff schedule and any relative section or chapter notes. If the goods cannot be classified solely on the basis of GRI 1, and if the heading and legal notes do not otherwise require, the remaining GRIs 2 through 6 may then be applied in order. As noted in H310746 (February 3, 2021), the term “part” is not defined in the HTSUS.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N346571).