The tariff classification of the Produced Water Separator - Hydrocyclone Module (321 Module) from the United Arab Emirates
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 14, 2025, on behalf of your client, Santos Limited – Oil Search (Alaska), you requested a tariff classification ruling. Descriptive literature was provided for our review. The item under consideration is described as the Produced Water Separator - Hydrocyclone Module (321 Module), which is industrial equipment used in the Nanushuk Processing Facility (NPF) to remove particulates and oil from produced water through centrifugal and gravitational separation.
Additional inputs such as pumps and pump motors assist in this function by pumping the clean produced water into the next module once it has been processed. The module completes the separation function through the use of two hydrocylcones and a produced water separator, which use centrifugal and gravitational forces to complete the separation. During operation, the produced water flows into the module through pipes from the Inlet Separator and Low-Pressure Separator.
The equipment for the module is within the building structure to ensure protection from the elements. The building serves as the central structure for the produced water to be filtered by the produced water separator and two hydrocyclone centrifuges prior to its disposal. The two hydrocyclones have been specifically designed and constructed to remove either sand or oil from the produced water, however, they complete the same overall function of removing contaminants from the produced water.
The process within the module begins with produced water flowing into the produced water separator. The produced water separator is a vessel that contains no mechanical components. The vessel utilizes weirs, which are physical structures to facilitate the water and oil separation. The produced water enters the vessel, where the oil, water, and gas will separate based on density and retention time in the vessel.
Oil is removed by spilling over a weir inside the vessel and the gas separates by rising up and out of the top of the vessel. The heavier particulates settle at the bottom of the separator with the produced water and are piped to the desanding hydrocyclone. The desanding hydrocyclone is then used to separate particulates from the water.
The slurry of heavy particulates enters the desanding hydrocyclone on an angle and the desanding hydrocyclone uses centrifugal force by swirling the water inside the vessel to complete the separation of particulates from the water. Once the particulates have been separated, the produced water is then piped to the deoiling hydrocyclone. The deoiling hydrocyclone is used to separate any entrained oil droplets from the water.
The water flows into the vessel, where centrifugal force swirls the water around inside of the vessel to complete the separation of oil droplets from the water. After this process, the remaining water is clean and then pumped out of the module to a produced water surge tank, which is a tank separate from the 321 Module and will be imported separately. Along with the major components, the module also has other minor components which work together to make up the operational unit of the complete module.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348977).