The tariff classification of a flash gas separator module from Canada
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 29, 2025, on behalf of your client, Santos Limited – Oil Search (Alaska), you requested a tariff classification ruling. Descriptive literature was provided for our review. The item under consideration is described as the 222 Low Pressure Flash Gas Separator Module, which is a filter module installed in the Nanushuk Processing Facility (NPF) in Alaska.
The module consists of a low-pressure flash gas separator, low pressure flash gas separator pumps, piping, valves, instrumentation, and controls to create a complete operational module. As the NPF is located in Alaska, the module also includes building heaters, building heater motors, exhaust fans, and exhaust fan motors. The 222 Low Pressure Separator Flash Gas Module is part of the flash gas separation assembly.
The assembly is comprised of three other components, a safety valve platform and two flash gas coolers. These sections have been shipped separately from this module and are not included for the purposes of this ruling request. The function of the 222 Low Pressure Separator Flash Gas Module is to separate hydrocarbon liquids (crude oil) from the incoming flash gas process stream. Flash gas is produced in the NPF as a consequence of the crude oil production process.
As the crude oil is exposed to lower pressures, this depressurization causes some of the crude oil to spontaneously vaporize, thus creating flash gas. Prior to entering the 222 Low Pressure Separator Flash Gas Module, the flash gas stream enters the low-pressure flash gas separator coolers. In the coolers, the temperature of the flash gas is reduced to a point that condenses the hydrocarbons back into liquid form while other gases and contaminants remain as vapor.
This stream then travels from the cooler into the 222 Module (the cooler ships separately to this module). When operational, the stream enters the flash gas separator via the module’s interconnecting piping. The flash gas separator is a vertical tank made from material SA-516-70N which is a normalized steel pressure vessel. It is in this vessel that the hydrocarbon liquids separate from the gas stream partially through gravity and density and partly through the mesh pads and vane packs.
As the gas rises in the flash gas separator, the gas is filtered through the mesh and vane assembly on the gas outlet. These mesh pads and vane packs provide a surface area for liquid droplets to coalesce and separate from the gas stream. As the gases exit the vessel they are routed via the piping to the flash gas suction scrubbers, or the low-pressure flare knock out drum (both not included in the 222 Module). While this process occurs, the heavier hydrocarbon liquids settle at the bottom of the vessel.
The hydrocarbon liquids are then transferred to the flash gas separator pumps where the recovered hydrocarbon liquids are transferred for further processing in the NPF.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349543).