The tariff classification of a separator module from Canada
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 29, 2025, on behalf of your client, Santos Limited – Oil Search (Alaska), you requested a tariff classification ruling. Descriptive literature was provided for our review. The item under consideration is described as the 231 Low Pressure Separator Module, which is a filter module installed in the Nanushuk Processing Facility (NPF) in Alaska.
The module consists of a low-pressure separator, a low-pressure separator desand transfer pump, a low-pressure separator emulsion pump, piping, valves, instrumentation, and controls to create a completely operational module. As the NPF is located in Alaska, the module also includes building heaters, building heater motors, exhaust fans, and exhaust fan motors.
The purpose of the 231 Low Pressure Separator Module is oil separation, with input streams consisting of a combination of crude oil with water and gas contaminants. In this module, the oil is separated from gas and water with each of the streams then piped for further processing within the NPF. Separation occurs in the low-pressure separator based on density and residence time for fluids in the vessel, the vessel internal also contains steel baffle plates which aid in the separation process.
The low-pressure separator is a 3-phase separator with three streams exiting the vessel being gas, crude oil, and produced water. Separation is assisted by the baffle plates internal to the vessel. As temperature and density of the fluids impact performance of this vessel, the inlet fluids are heated using the upstream crude oil heaters included as a part of the 223 Vessel once the full system is installed on-site.
The low-pressure separator desand transfer pump and low-pressure separator emulsion pump in the 231 Module are intermittent service pumps. Both of these pumps service the low-pressure separator and aid in the overall function of the oil separation. When operational, emulsion, which is an oil and water mixture, can build up and form a layer in the low-pressure separator vessel.
The low-pressure separator emulsion pump functions by pumping this emulsion from the low-pressure separator back to other areas in the NPF for further processing. Additionally, as crude oil enters the low-pressure separator, residue sand may follow. This sand builds up in the separator, collecting as a sand layer at the bottom of the vessel. Nozzles within the separator stir up the sand and remove it from the separator as a sand and water slurry.
This slurry is then pumped from the low-pressure separator using the low-pressure separator desand transfer pump to other facility areas in the NPF.
By operation of General Rule of Interpretation 1 and Note 4 to Section XVI, the applicable subheading for the 231 Low Pressure Separator Module will be 8421.29.0015, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases; parts thereof: Filtering or purifying machinery and apparatus for liquids: Other: Other: Oil-separation equipment.” The general rate of duty will be free.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349602).