The tariff classification and country of origin of tool blanks
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The general rate of duty will be 2.9 percent ad valorem.
Ruling text
In your letter dated June 25, 2025, on behalf of Wila USA LLC, you requested a classification and country of origin determination for purposes of Section 232, IEEPA duties and marking under Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304). Pictures and descriptions of the manufacturing processes were included in your submission. The articles under consideration are two unfinished tool parts that will used in a press brake machine after they are further processed in the United States.
The finished parts are identified as a top tool punch and a bottom tool die. The top tool punch is installed in the upper beam of a press brake machine, while the bottom tool die is installed in the bottom beam. They are used in conjunction with each other to form and shape sheet metal. Depending on the specific shape of the punch and die, the press brake machine can make a variety of parts used in different industries.
You have stated that you plan to import the top tool punch and the bottom tool die separately and unfinished at the time of importation. You propose two manufacturing scenarios, which you refer to as Step 1 and Step 6. The following scenarios are the same for the top tool punch and the bottom tool die. Manufacturing scenario one (Step 1): German steel bars or Italian steel plate will be imported into the Netherlands and used interchangeably to manufacture the unfinished tools.
In the Netherlands, the steel bars or steel plate are milled on all sides in a specialized mill machine into the overall form, shape, and contour of the finished tool. The tool blank is then sent to the United States for further processing, including induction curing, tempering, straightening, and shot blasting. The part of the tool that connects to the press brake machine is ground to accuracy, and the part of the tool that bends sheet metal is sharpened to precision.
In some instances, depending on customer specifications, the length of the tool may be cut in order to fit into the press brake machine. Finally, a safety-click mechanism is mounted onto the tool and the tool is laser engraved. Manufacturing scenario two (Step 6): German steel bars or Italian steel plate will be imported into the Netherlands and used interchangeably to manufacture the unfinished tools.
In the Netherlands, the steel bars or steel plate are milled in a specialized mill machine into the overall form, shape, and contour of the finished tool. The tool blank is further processed, which includes induction curing, tempering, straightening, and shot blasting. The part of the tool that connects to the press brake machine is ground to accuracy. The tool blank is then sent to the United States, where the part of the tool that bends sheet metal is sharpened to precision.
In some instances, depending on customer specifications, the length of the tool may be cut in order to fit into the press brake machine. Finally, a safety-click mechanism is mounted onto the tool and the tool is laser engraved. Classification Merchandise is classifiable under the Harmonized Tariff Schedule of the United States (HTSUS) in accordance with the General Rules of Interpretation (GRIs).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350641).