The tariff classification and country of origin of an oil filter
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The general rate of duty will be 2.5 percent ad valorem.
Ruling text
In your letter dated September 3, 2025, you requested a tariff classification and country of origin determination ruling. Descriptive literature was provided for our review. The item under consideration is described as an automotive oil filter (model WT502821), which is designed for use in the lubrication system of internal combustion engines, specifically in passenger vehicles and light-duty trucks.
The filter removes impurities and particulate matter from engine oil to ensure proper lubrication and engine protection in both gasoline and diesel engines. The outer casing of the filter is made of a corrosion-resistant steel, while the filter media is made from synthetic fiber or cellulose, which is used to trap particulates. The end caps and center tube are metal or plastic structures that provide support to the filter media.
The filter also has a rubber or metal anti-drain back valve and bypass valve that regulates oil flow and prevents oil leakage. The oil filter is attached to the engine via a threaded fitting on the base plate, which screws onto the engine’s oil filter mount. The rubber gasket creates a tight, pressure-resistant seal between the filter and engine block to prevent oil leaks during operation.
The Chinese components include the cold-rolled steel disc, electroplate steel wire, upper end cover, heat curing adhesive, galvanized thin sheet, filter paper, lower end cover assembly, diaphragm, O-ring, sealing plate, toothless cover plate, sealing ring, and some of the packaging material including the boxes and labels.
The remaining items are from Malaysia and include the spin-on oil filter, spray shell assembly, shell, white powder, oil filter element assembly, central tube, origami, screw-fit plate assembly, threaded cover plate, and the rest of the packaging including boxes, dust film, pallets, and corner protectors. The manufacturing process occurs in Malaysia and starts with creating the metal discs using a press machine and then stretch forming of the spin-on oil filter housing using the 200T Press Machine with robotic arm.
The metal is placed onto the rack where a mold draws out the shape and the excess material is trimmed. The next step includes the housing powder coating. The newly formed metal housing has the powder sprayed onto it before being inspected for flaws. The next process is the pleating process, which starts with a roll of filter paper that is pleated via an automated filter paper pleating machine.
The material then goes onto the slitting machine for proper slitting according to the specifications provided on the product drawing. The oil filter center tube is then added before the media assembly is completed. This involves placing the pleated filter paper onto the automatic paper splicing equipment. The thermosetting adhesive is then added before adding the end caps and baking in an oven. Next, the cap cover plate is placed in the tapping equipment and spot welded into place.
The final assembly includes adding the O-rings, sealant, anti-drain valve, spring, and paper core into place. Then, all of the items are sealed, and a leak test is performed before final labeling and packaging.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N353214).